|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
please recommend a front hub that accepts 12mm endcaps for a 12x100 thru axle
Please recommend a front hub that accepts 12mm endcaps for a 12x100 thru axle. 32h preferred. This is for a gravel/ bikepacking wheel.
The more affordable the better, but want durability. Lightweight is not as important. Last edited by Erik_A; 05-23-2017 at 07:28 PM. |
#2
|
|||
|
|||
Hard not to like DT Swiss 350/240. End caps for days!
|
#3
|
|||
|
|||
Where can I find 12mm endcaps for the 6-bolt DT Swiss 240S front hubs? I can only find them for the 6-bolt 350 hubs and the Centerlock 240S front hubs.
Last edited by Erik_A; 05-23-2017 at 07:39 PM. |
#4
|
|||
|
|||
They should be interchangeable...give them a call at the grand junction Colorado number to be sure looks like there is a place in Minnesota too. Numbers are listed on their site under contact us and USA service provider.
|
#5
|
|||
|
|||
Quote:
But, as stated above I believe the end caps are shared between centerlock and 6-bolt. I've also had the Velocity Lightweight and SRAM 900 hubs (6-bolt) and they come with all the endcaps. No tools required. Last edited by ColonelJLloyd; 05-23-2017 at 11:52 PM. |
|
|