#1
|
||||
|
||||
Origin 8 propulsion mustache bar 'Tiki Bar' question
does this bar have a the correct diameter for road or mtb levers
|
#2
|
||||
|
||||
Amazon says yes to road and no to mountain.
__________________
Carping all them diems |
#3
|
||||
|
||||
I have a set, road on mine.
These also flex a bit. |
#4
|
|||
|
|||
And they don't take bar end shifters...
|
#5
|
||||
|
||||
KVN...that is the deal breaker. thanks everyone for their input
|
#6
|
|||
|
|||
I was curious about what these bars looked like so I did a google image search. The first pic that comes up shows bar ends attached. Maybe the bar specs have changed at some point?
|
#7
|
|||
|
|||
Good point. I wold hope they updated the interior diameter.
I used the bars about 3 years ago. My ultegra barcons wouldn't fit, but I found a pair on suntour shifter that squeezed |
#8
|
||||
|
||||
I emailed Origin8
The Tiki bar has a 20.2mm ID on it. Should be compatible with most bar end
shifters. Kind Regards Gary Mendenhall Me: my Noodles measure 20.3 I.D. and my 8 speed Shimano bar ends measure about 20mm O.D. Last edited by pinkshogun; 03-20-2015 at 01:41 PM. |
|
|