|
|
|
|
#1
11-20-2014, 10:01 PM
|
|||
|
|||
|
SOLD! Custom English w/Di2, SRM - 56 ett
SOLD! I bought this almost exactly a year ago from Fairwheel Bikes as a result of a PSA here on the forum. I am the second owner.
And, a year later . . . it is still mostly in the original packaging and box I received it in from Fairwheel. I had the best & worst of winters last year, and for both reasons have had very limited bike time over the past year. Now, when I do ride, I am focused almost entirely off-road, and, regardless of surface, on a very few of my bikes. This one needs to go to someone that will actually unpack it, much less use it! Rob English custom frameset. I have included a few photos below, and they obviously are not mine (there are plenty of photos and write-ups of this exact bike on the web). I think you get the idea - the bike is utterly gorgeous, and from my inspection of it when I received it, it has very minimal signs of use, and absolutely no dings, dents, etc. But if you really need me to, I will unpack it and take current photos. 7970 Di2, with English-designed custom internal (seat tube) battery. Charging cable/setup included. Wireless SRM, with (again, as I was informed) fully functioning battery - less than 1,000 miles on this, but it has sat for a year. Saddle, pedals, and everything else you see in the photos is included . . . except . . . No wheels, but the cassette is included. If you really need wheels, we could discuss some of the spare sets I have. But, to be honest, I'd rather not bother at this point, and since the bike is essentially packed and ready to ship as-is, with no room to add wheels to the box, I'd like to sell it without any. (However, I do have a pair of NOS 28h ENVE Classic 45 carbon clincher rims that I could do a package deal on, and most likely slip into the existing shipping box -I'll check on that tonight. Those rims would look fantastic on this bike, very close to what is shown below.) Less than 1,000 miles on the setup, according to the info I received when I bought it, and I have no reason to doubt that. The full geometry is shown below. Keep in mind that it is an integrated seat mast, but if all you need is a lower saddle position, I would be happy to facilitate having Rob himself cut it to your size before I ship it to you. (See my post below for an update - yes, Rob will do it!) SOLD! I'd like to simply recover what I paid, so $3,260 net to me - you cover PayPal fees (if any) and shipping. For this frameset, the Di2 group, and the SRM, that seemed like a deal to me a year ago. Hopefully I wasn't wrong! Finally, I will need up to a week to ship this. Yes, it is essentially packed and ready to go, but, depending on when (if?!) someone buys this, I may be away from the bike for a couple of days and unable to ship it until I return. So please be patient with me!         
Last edited by ORMojo; 11-23-2014 at 10:58 AM. Reason: Sold 
|
|
#2
11-20-2014, 11:08 PM
|
||||
|
||||
|
If you'll sell the frameset, and ship to Australia, I'm all over this...
__________________
My bikes over the years
|
|
#5
11-20-2014, 11:40 PM
|
||||
|
||||
|
Quote:
Besides which I have some 9070 Di2, Turn cranks & 2014 EE Brakes that'd be *perfect*!
__________________
My bikes over the years
|
|
#6
11-20-2014, 11:44 PM
|
|||
|
|||
|
Quote:
Quote:
Sorry, but for a number of reasons I'm not interested in breaking it down or shipping to AU. Hope you find what you are looking for. P.S. - But if you take it as is, and cover the shipping, I'll send it to you. Then locally selling off what you don't want - Di2, SRM, etc. - could leave you with a really sweet deal on the frameset.
|
|
#7
11-20-2014, 11:52 PM
|
||||
|
||||
|
I'm working on it, will PM later today...
__________________
My bikes over the years
|
|
#8
11-21-2014, 11:47 AM
|
|||
|
|||
|
Bumping, Plus Additional Small Detail
I have several interested parties circling and asking questions, but no sale yet. Since this has already slid down to page 2, I thought I would bump it up before I head out for the next several hours (I'll try to keep responding to PMs via my phone).
And one additional bonus detail I left out of the original post: This comes with the additional Di2 sprint shifters installed on the drops!
|
|
#10
11-21-2014, 02:22 PM
|
|||
|
|||
|
Rob's Response
Since several of you are waiting to hear, I just received a response from Rob English. In part, he said: "If you need help with that then that isn't a problem - we just need the new rider's saddle height to know where to cut. I can do that as a while-you-wait service, then you can take it away for packing/shipping."
So that service is available to you if desired.
|
|
#12
11-21-2014, 02:44 PM
|
||||
|
||||
|
Man.....if that fit's you...it's a smokin deal.
__________________
Mr. Bob Dobalina
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
