#1
|
|||
|
|||
Campy crank and bb compatibility question
OK, I have a Campagnolo Veloce ct crank that uses a square taper bb. I believe the spindle length required is 111mm. I also have a Campy Record bb with a 111mm spindle like this one:
http://rainorshinecycles.com/ebay/ca...2705-44612.jpg Can I use this bb with the veloce ct crank? Or do I need the specific veloce bb like here: http://www.bikyle.com/images/Parts/C...ket_Veloce.jpg Thanks! |
#2
|
|||
|
|||
Dont see why it should not work.
|
#3
|
|||
|
|||
That record BB looks like a 102 mm BB because of the recessed right cup. There is a 111 mm asymetrical Record BB for use with racing triple cranks that has a bulging right cup. There is also, I believe, a 111mm symetrical record BB for track use. I don't know if any of them will set up a Veloce crank with the right chainline or centered pedals.
|
#4
|
|||
|
|||
Quote:
|
#5
|
|||
|
|||
Use the bottom picture....it's a Veloce. They came in 111 symetrical or 115.5. Any Centaur 111 great also.
The Record is wrong one....it's either 102, or 111 asymetrical for triples. Or for track. Edit.....Veloce/Centaur takes a different 111 symetrical spindle. Chorus/Record different design....takes the 102 symetrical BTW....all have same chainline when mated to correct BB....so you can't use a crank needing a 111 on a 102. And you can't use the Chorus/Record double with 111. Sticks out too far. Last edited by Ralph; 05-13-2013 at 06:56 PM. |
#6
|
|||
|
|||
I'm not sure what that would be, maybe it is the track BB.
|
#7
|
||||
|
||||
Quote:
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
|
|