#1
|
|||
|
|||
Suggestions for Rohloff Compatible Frame?
I bought a nice rohloff wheelset off of here awhile ago, then life got busy and I haven't done anything with it and need to figure out a good frame for it. The wheels are built into Stans 29er Flows and are disc only. I would like to get an all-around bike - I already have too many other bikes including a light road bike and a nice 26-inch mountain bike. Any suggestions on frames I should look at that are on the cheaper end (like $600 or less)? I'd prefer to not have to use a chain tensioner, but could if needed. Basically I spent my allocated money on the wheels and should probably try to keep the frame pretty cheap - I have looked at the surly ogre which seems cool but maybe on the heavy side. Anyone have any good suggestions?
|
#2
|
||||
|
||||
Gellie Custom Cycles does custom roloff frames.
__________________
Box? What box? There's a box? |
#3
|
||||
|
||||
Frames start from $2350 in Columbus Zona tubing: with Tig welded construction, Breezer vertical rear dropouts, with the option to retain or remove the standard rack/mudguard eyelets.
$2400+ about USD. |
|
|