WTB 175mm MTB or compact road crank arms or crankset

[Likes2ridefar]

FOUND

Prefer to keep this under $200 shipped to NYC but open to anything. let me know what you have.

must fit standard bottom bracket shell.

looking for higher end models like Sram rival, shimano XT/ultegra XTR etc.

must be 175mm. it does not need to come with chainrings.

this is for a 'cross single speed so if you have a single speed crankset PERFECT!

[JayBay]

I have a SRAM S1400 (2x10) crankset I've been meaning to put up for sale. It's 175mm with 26/39 rings. Used for a few weeks before I replaced it with a single speed crankset. A few scratches and scuffs, but in great shape overall. I've got a brand new GXP bottom bracket with it too.

This one:
http://www.sram.com/sram/mountain/pr...path/term-id/8

[DRZRM]

Got a White Industries forged 175 in this thread.

http://forums.thepaceline.net/showthread.php?t=100750

Easy to set up single, but it obviously needs a square taper BB. Great cranks though.

[Likes2ridefar]

i really like the white industries but am concerned with the proprietary tools for installation as i need to have this settled by the end of next week and ready to race the following week.

initially I'll need to run a 32 or 33T chainring.

[DRZRM]

These are not ENO cranks (that's what I replaced these with) they are older (90s) forged triple cranks that have seen very little usage and look great for a SS build (they can be mirror polished if you have the time and energy). Maybe a bit dated, but at my $85 shipped asking you can pick up a Phil BB and with the adjustable cups on that BB you will have perfect chainline that spins like butter for about $200.

[Look585]

I have a couple sets of Race Face 94/58 and a couple sets of Ritchey Logics (110/74 or 94/58). A bunch of square taper cartridge BBs as well.

[Likes2ridefar]

i found some truvativ 1.1 per recommendation from one of the forum members.

thanks.