#91
|
|||
|
|||
I've tried a few different brands of the AliExpress ones (Cyclami, Ridenow, a couple others). They hold air better than latex and about on par with lightweight butyl I've found. So pretty good, but not forever.
|
#92
|
||||
|
||||
I just ordered the Cyclamis a couple days ago as a test. They hold air fairly well?
I always carry C02 but rarely use it (sometimes for people I assist while out) Tubalito has always claimed C02 is fine to use. Any further thoughts on this? Been running latex for some time now |
#93
|
||||
|
||||
Quote:
__________________
Cheers...Daryl Life is too important to be taken seriously |
#94
|
||||
|
||||
Quote:
Ever use Co2 ? |
#95
|
||||
|
||||
Broadly no and specifically in a tpu tube, no. If I did it would be as slow an inflation as possible to avoid freezing the tube.
__________________
Cheers...Daryl Life is too important to be taken seriously |
#96
|
||||
|
||||
Quote:
Thanks |
#97
|
||||
|
||||
First impressions of RH TPU tubes are as expected.
They hold air well - similar retention to butyl and much better than latex. I took more installation care to ensure that the tube was aligned with itself and the valve stem, mainly because TPU doesn't feel particularly stretchy. Ride quality is not remarkably different than tubeless for 650x42 Babyshoe Pass EL. A TPU is considerably lighter and smaller in the spare kit. This may be a good alternative to tubeless for wheels that don't get ridden that often, where sealant collects and hardens. |
#98
|
|||
|
|||
My first impressions are the same. They ride great and the polished stem on my great old steel bike looks nicer.
I've never run tubeless because I really don't like dealing with the messy goop.
__________________
Just some skinny guy, likes bikes. |
#99
|
||||
|
||||
Quote:
Jan Is it better to size up or down on TPU tubes for a tire that fits two size ranges? For example, 650x48 |
#100
|
|||
|
|||
Does anyone know whether CO2 diffuses through TPU the way it does through butyl? Does the fact that a TPU tube filled with CO2 had lost pressure by the next morning mean the tube would lose pressure if filled with air?
|
#101
|
|||
|
|||
Rene-Herse says not to use CO2 with TPU tubes, except for topping up. CO2 is soluble in rubber, so I would think it's logical that TPU would retain CO2 pressure better than rubber tubes.
|
#102
|
|||
|
|||
So if you carry a tpu as a spare to save space, you have to carry a pump that overrides that space saving. But if you do run a tpu it’s safe to break out a co2 to top it off instead of using that pump? Probably just me but I don’t see the sense in that.
|
#103
|
|||
|
|||
Probably just me but I don’t see the sense in that.[/QUOTE]
It makes perfect sense if you already carry a mini pump because you think using CO2 doesn't make any sense. |
|
|