#1
|
||||
|
||||
HPlusSon Hydra Tubeless Setup
Just finished building a set of Hydras which I am planning to run Tubeless with Compass Barlow Pass.
Can anybody suggest their preferred setup as far as Tubeless rim tape (brand and width), valve and sealant for these rims? Much appreciated Sent from my iPhone using Tapatalk |
#2
|
|||
|
|||
Stan's, Stan's, and Stan's.
|
#3
|
|||
|
|||
Haven't used those particular rims. They look great (but I'm not a fan of most any rim logos - definitely not those). What hubs are you using? Formula? Bitex?
I've never had problems with two passes of any rim tape including Stan's, Pacenti, Velocity and Orange Seal. Never had trouble from any of the tubeless valves I've used including WTB, Velocity and eThirteen. The latter comes with a valve core remover end cap which has been very, very useful. I did a good bit of research and asking around before I tried tubeless and issues with Stan's sealant steered me to Orange Seal. I now use the Endurance formula on everything and it's good stuff. Take your time, clean your rim with a clean cloth and alcohol, use an awl or similar to make room for your valve, etc etc. Last edited by ColonelJLloyd; 12-13-2017 at 08:11 PM. |
#4
|
||||
|
||||
Quote:
Thanks a lot. Yeah they are Bitex BX106R centerlock. Good for the application I am playing to use these rims on. The rim internal width is 20mm. Which tape width would you recommend? Sent from my iPhone using Tapatalk |
#5
|
||||
|
||||
Quote:
https://rover.ebay.com/rover/0/0/0?m...2F182738553047 Any of the mentioned sealant or valves, I like OrangeSeal.
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#6
|
||||
|
||||
Quote:
Thank you v much Sent from my iPhone using Tapatalk |
#7
|
|||
|
|||
That linked 3M tape is probably what the Pacenti/Velocity tape is. Stan's is a bit different. At least it's a little thicker. But, with two passes it all seems to work the way it should. I've never had issues with adhesive properties or slipping or anything. I'm always careful to make sure the rim is very clean before laying the tape.
And, yes, the 21mm width will work well on your rims. I've also used the same tape for i23 and i26.6 rims without issue. |
#8
|
||||
|
||||
Quote:
I agree, 2 layers for all tires, tubeless Or tubed. Only need one for tubeless but if ever got to put a tube in there.....yup, clean with alcohol first.
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#9
|
|||
|
|||
Stan's appears to be Tesa 4289.
I got a big roll of it after buying so many little Stan's rolls, and it seems identical in thickness, tackiness and possibly even flavor.. |
|
|