#1
|
||||
|
||||
stupid GPS question: turn a .fit file into gxp
so my garmin generates a .fit file from rides i've done.
i want to repeat one of them and would like to load the route in the gps as a course. how do i do this?
__________________
http://less-than-epic.blogspot.com/ |
#2
|
|||
|
|||
https://www.alltrails.com/converter/?referrer=gpsies
Have not tried it, but I read it converts in either direction. |
#3
|
|||
|
|||
go to Garmin Connect
click on activities, go to the details of the completed activity, then click the gear icon in the upper right of the screen, then you'll see a pull down of all the things you can do, and one o them is convert to whatever you want.
__________________
Crust Malocchio, Turbo Creo |
#4
|
||||
|
||||
DC Rainmaker covers things like this in some of his postings. I was able to stitch together a Garmin 800 file with a Fenix 5 file to build a complete single ride. I had forgotten to charge the 800 after the first day of a two day ride and it died 10 miles from the finish of the second day. When it did, I started the Fenix and got everything but cadence...
For that situation, it was just a matter of opening both files in a text editor and copying relevant bits to the right place...
__________________
Colnagi Seven Sampson Hot Tubes LiteSpeed SpeshFatboy |
#5
|
|||
|
|||
If any of the above fails, and you can get your route in Strava, you can download the gpx file from a Strava activity.
|
#6
|
||||
|
||||
thanks guys, sorted!
__________________
http://less-than-epic.blogspot.com/ |
#7
|
|||
|
|||
ride with gps will do this too, upload, convert to route
|
|
|