Looking for a high polish cable hanger for the front-brake (1 1/8")

youfoundron · #1 07-19-2021, 11:38 AM

Looking for a high polish-cable hanger for the front-brake (1 1/8")

I dig Paul's Funky Monkey but that thing in high-polish is basically unattainable as far as I can tell.

Only alternative I've found so far is this one by problem-solvers -- https://www.bicyclepedaler.com/produ...r-182078-1.htm

A bit of a step down imo...

Looking for suggestions, thanks!

robt57 · #2 07-19-2021, 11:39 AM

I have used a regular one, but fitted a V brake noodle with the liner with VG results.

m_sasso · #3 07-19-2021, 01:13 PM

Picture of the PS, it is nicely finished and anodized, however could be de-anodized and polished up. The Synchros stem is just raw polished Al for a comparison.

youfoundron · #4 07-19-2021, 01:25 PM

Quote:

Originally Posted by m_sasso

Picture of the PS, it is nicely finished and anodized, however could be de-anodized and polished up. The Synchros stem is just raw polished Al for a comparison.

How intense is the de-anno process -- like something you can do in a weekend or a bit more involved?