|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ceramic Rims: Boyd Ceramic Vs DT Swiss Oxic Vs Mavic Exalith Vs HED Black
So...thinking about spending some money and my eyes like how the current crop of ceramic rims accentuate my bike. If anyone has personal experience, it would be helpful to know which manufacturer makes the most durable black coating. Here are the four rim/wheelset manufacturers that I am looking at:
1) Boyd Altamont Ceramic Lite 2) DT Swiss DiCut Oxic 3) Mavic Ksyrium Exalith 4) HED Ardennes Black Thank you for the insights. |
#2
|
|||
|
|||
thread on Vsalon about OXICs
I have 'handbuilt' alloy wheels from Alchemy, Boyd and others. I have been impressed with the OXICs on all levels.
As with others experience, surface has proven durable. Braking on OXICs is far better than previous experience with standard alloy wheels even when using green Swissstop pads. Build quality of the DTs is excellent. I believe they are adding a 30mm deep OXIC rim in near future. Here's 80 plus pages on an Italian site. A DT Swiss rep replies to many of the questions... https://www.bdc-mag.com/forum/thread...218204/page-87 |
#3
|
|||
|
|||
Quote:
|
#4
|
|||
|
|||
For durability, the Mavics. For overall wheel design and performance, the DT Oxics. Avoid the Fulcrum/Campy options...the wheels are great, but the coating is the least durable.
|
#5
|
||||
|
||||
I can only comment on the boyds, which are freaking excellent, but don't expect the coating to be a forever thing. If you ride road only, in good conditions, I can see it lasting for a TON of miles (like 4-5k at least) but if you ride in rain or gravel you will get scratches an wear much quicker.
Braking performance is very nice. |
#6
|
|||
|
|||
I was also looking at these wheels recently and there is some discussion across the hall on the DT Swiss, on the Boyds here on the paceline, as well as on the various available options on WW.
BDC mag forums linked by one60 have lots more discussion on a few of the available options, just needs to be translated to read. From what I could gather, the coating on the Exaliths and OXICs have been solid. The 2nd gen boyds seem to be holding up well (R3awak3n might have the most miles on these on the paceline, but haven't seen any recent updates). Good reports on durability and braking for the Vision Trimax 30KB as well (I went with these bc I happened to get a killer deal, but was leaning towards the DT Swiss or Boyds) edit: aaaand R3awak3n posted as I was writing my reply. haha |
#7
|
|||
|
|||
Quote:
|
#8
|
||||
|
||||
Quote:
My 1000 mile set looks almost new expect for I rode in the rain for 30 miles and a tiny stone must have been caught in the rear brake and I have a line all around the rear wheel. Quote:
I would not be surprised if they did. I tossed 5k because I read a post from boyd about pros using them and them only now starting to have some wear at 5k (but now that I am thinking, maybe was 15k. I should really find it and post it here) edit - right on the boyd site. https://www.boydcycling.com/faq_cat/alloy-wheels/ scroll down. They say thats after 8k miles. Mine are in much worst shape than all those after a couple of rainy rides in the dirty grimmy streets of NYC Last edited by R3awak3n; 07-18-2018 at 05:44 PM. |
#9
|
||||
|
||||
Maybe your experience, but certainly not that of everyone. I've got 2 pair of Shamal Milles, one set with 20,000 miles, and the brake track still looks brand new. Also, Campagnolo's PEO ceramic coating is the exact same coating as Mavic's Exalith, done in the same factory.
__________________
BIXXIS Prima Cyfac Fignon Proxidium Legend TX6.5 |
#10
|
||||
|
||||
Another vote for the Exalith. Durable and effective without being grabby or too too loud.
|
#11
|
|||
|
|||
Interesting thread, been debating what to do in terms of rims for a hubset I have.
Do any of the Mavic Open Pro rims have the Exalith textured surface that some of their prebuilt wheels have? Those wheels stop incredibly well. |
#12
|
|||
|
|||
Quote:
|
#13
|
|||
|
|||
Those who have the Mavic Kysrium Exalith -- could you please state the weight of the wheelset, if you actually measured it. I think Mavic underestimates weights tremendously.
Thank you! QUOTE=Cornfed;2396853]Another vote for the Exalith. Durable and effective without being grabby or too too loud.[/QUOTE] |
#14
|
|||
|
|||
different generations of coatings
Part of the confusion is due to not recognizing that the first generation of coatings were not designed to be permanent, it was more about aesthetics. Fulcrum, H-Son, Vision, Boyd and others initialing used this approach before switching.
The 2nd generation (PEO) coating is integral to the alloy to provide a long wearing surface. https://www.dtswiss.com/en/technolog...ic-technology/ |
#15
|
|||
|
|||
Quote:
????? I don't understand how this idea makes any sense. We're talking about surface treatments to enhance braking - why would you choose to improved braking just for a portion of the lifetime of the rim/wheel? Can the surface treatment be re-freshed when it wears off, or is the useful life of the rim/wheel limited by the lifetime of he surface treatment? |
|
|