#1
|
|||
|
|||
Roval (DT Swiss) Hub Question (QR->TA->Boost)
I am looking at a pair of Roval Control Alloy 29 wheels that is being offered locally. The price is right and it is in QR set up already, which is what I am looking for.
The wheels came from the 2012 Stumpjumper Expert HT. The hubs were made by DT Swiss apparently. Question is if these wheels can be converted to TA/Boost with conversion kits? I will get the wheels regardless since it fit my application. This is just more of a curiosity for future compatibility.
__________________
Dean El Diente BH Lynx 4.829 Jamis Ventura (Kickr) Last edited by tuxbailey; 07-09-2020 at 02:55 PM. |
#2
|
|||
|
|||
TA, yes, DT stuff is good with that. Boost, probably, if the rotors are 6-bolt, wheels will need to be re-dished.
|
#3
|
|||
|
|||
Quote:
Re-dished for Boost, not TA?
__________________
Dean El Diente BH Lynx 4.829 Jamis Ventura (Kickr) |
#4
|
||||
|
||||
#5
|
||||
|
||||
Quote:
dagapito@dtswiss.com
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#6
|
|||
|
|||
yes, TA no re-dish required, but going to boost shifts the wheel center in the frame.
|
#7
|
|||
|
|||
If you convert to boost by changing endcaps then you will need to move the rotor or caliper somehow. There are a couple kits out there.
|
#8
|
|||
|
|||
Thanks for the help with my question. Learned quite a bit.
I picked up the wheels this afternoon and installed them. Although they are 8 years old, they are a significant upgrade from the stock wheels. Sent from my Moto Z (2) using Tapatalk
__________________
Dean El Diente BH Lynx 4.829 Jamis Ventura (Kickr) |
|
|