#1
|
|||
|
|||
Play in cassette on hub?
I just pulled apart my Campy Chorus cassette & cleaned it. Put it back together, and there is a small bit of side to side play as it sits on the hub. I've done this many times before, just did it with another wheelset yesterday, and never noticed this before. Is this acceptable/normal? It's possible it has always been like this, and I just never noticed since it is a small bit of play. I do remember the one I did yesterday sat very tight on the hub.
One note...a spacer on this cassette is cracked, but none of it is missing so it would take up the same amount of room. |
#2
|
||||
|
||||
Quote:
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#3
|
|||
|
|||
Quote:
EDIT: I found this thread (https://forums.thepaceline.net/showthread.php?t=209890) that sounds like the same issue. I started from step 9, as suggested. Couldn't get it any tighter. Last edited by makoti; 09-01-2019 at 08:30 PM. |
#4
|
||||
|
||||
Quote:
http://0104.nccdn.net/1_5/30d/138/24...ADJUSTMENT.pdf
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
|
|