#1
|
|||
|
|||
Through Axle Truing Stand Adaptors
Does anybody know of a through axle adapter that is both 12 and 15mm?
Like these guys from problem solvers, but 12/15 not 10/12 or 15/20? |
#3
|
|||
|
|||
I have a set (one pair of 12,15 and 20) of these. Pretty quick to just pop them in and out. And, I never got around to getting a QR skewer long enough. I use a TS-2.2 (and have used a TS-3 with them) and tightening the stand arms against the hub is plenty adequate so I don't mess with securing hubs with a skewer.
I think the Park and Abbey "rods" get you from 12-20 and all in between, but that's a little different than what you're after and you are probably aware of them. Last edited by ColonelJLloyd; 08-09-2018 at 12:57 PM. |
#4
|
|||
|
|||
Quote:
Correct, the park and abbey rods definitely work. I've got a travel toolbox I'm putting together, so those rods are a bit bigger than I want to mess with. I've got a set of the Problem Solvers 15/20mm, so I guess I'll just grab the ones you linked off ebay in 12mm - I'd seen those before while poking around. |
#5
|
|||
|
|||
me too, even though I make an attachment for Park TS-2.2 stands so you can true 5" fatbike wheels with the tire on that works with any TA wheel.
|
#6
|
||||
|
||||
Quote:
https://www.excelsports.com/main.asp...QaAn0TEALw_wcB
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#7
|
||||
|
||||
#8
|
|||
|
|||
I don't see anything appropriate listed by MTBtools, do you have to ask?
|
#9
|
||||
|
||||
I use these
https://www.ebay.com/itm/Bike-Wheel-...72.m2749.l2649 Excellent. Work as advertised. Nice quality. Not super expensive. $20 you get both 12 and 15 and done Last edited by R3awak3n; 08-10-2018 at 11:44 AM. |
|
|