PSA's - GOOD DEALS - BARN FINDS !!!...!!!...!!!

[AngryScientist]

only a few hours left on this one and the bid is at $90.

not sure exactly what we have here, including what sized wheels it might be spec'd for, but this might make a nice build for the right small rider, perhaps a wife or kiddo. hard to beat a waterford if it stays cheap and someone is willing to take a chance on it.

https://www.ebay.com/itm/Waterford-P...16.m2518.l4276

[R3awak3n]

dang, someone pick that up, that is sweeet

[stephenmarklay]

Originally Posted by Clean39T

Almost hit the BIN before I saw the TT length..

https://www.theproscloset.com/produc...oad-bike-large

Hampsten MAX 60x56 w DA9000 mix and nice FLO wheels for $2500ish.

Compared to what you can buy new, this is a great deal.

[R3awak3n]

that hampsten is a steal. Gourgeous color, love DA 9000 and you get carbon hoops for $2500? not bad at all. Geo is a bit short and high which is probably why it has not sold yet.

[DeBike]

Originally Posted by R3awak3n

that hampsten is a steal. Gourgeous color, love DA 9000 and you get carbon hoops for $2500? not bad at all. Geo is a bit short and high which is probably why it has not sold yet.

Very nice, even it was my size, that geo would not work for me.

[DeBike]

Originally Posted by DeBike

I had never seen a Hors category before. What is the purpose of the way the seat stays are. I understand the arc in the tubing, but are those some type of attachment or adjustment mechanisms near the top and bottom of them?

The Hors Category bid is at $620 + 50 shipping with just over 5 hours left, 1:46 eastern time. 90 watchers. It will certainly go to the last seconds.

[Veloo]

Grammo stem. 130 mm.

https://www.ebay.ca/itm/Cinelli-GRAM...UAAOSwWeZfYZ1L

[stephenmarklay]

Originally Posted by R3awak3n

that hampsten is a steal. Gourgeous color, love DA 9000 and you get carbon hoops for $2500? not bad at all. Geo is a bit short and high which is probably why it has not sold yet.

Yeah, I could fit on it but it is probably suited to a longer leg 34-35 inseam around 6’1(ish).

[jkbrwn]

$799 for the Hors... The seller must be pleased considering his BIN was $700.

[cnighbor1]

Officina Battaglin Power Plus Disc - $2,500 XL
https://sfbay.craigslist.org/sfc/bik...198676587.html

I'm selling my Officina Power Plus. I have too many bikes at the moment. Below is the build as well as some details from Officina's original ad. This bike is steel, not carbon. It is brazed except for the bottom bracket area, which is tig welded. It's a beautiful bike. Please let me know if you're interested or just have questions.
Size: X-Large (suitable for someone 6ft to 6ft3)
Frameset: Officina Bataglin Power Plus Disc with custom paint
Gruppo: Campagnolo Potenza Hydro (52/36 rings w 11-32 cassette)
Power meter: 4iiii left side crank
Bar: Deda Zero 100 (40mm)
Stem: Deda Superleggero (100mm)
Seatpost: Deda Superleggero (zero setback)
Wheels: Mavic Open Pro Disc with Novatec hubs and Sapim Laser Spokes (28h)
Tires: Tubeless Schwalbe g-one 30mm (rear is a little worn)
Disc Rotors: Swiss Stop 160mm front and 140mm rear
Saddle: Rapha Classic 148mm
Ti hardware throughout
No pedals

Weight is just under 20lbs

See photos for geo.

Oversize tubing

The Power+ Disc is built from the latest Columbus Spirit HSS triple butted tubeset. Steel may have abdicated as the material of choice for the majority of cyclists, but Columbus has never stopped being the first contributor to innovation in its field. Featuring oversized tube profiles, the Spirit HSS are the first step towards a lightweight steel frame with racy aesthetics.

Fillet-brazed construction

The Power+ Disc is built using fillet-brazed construction.

Fillet-brazing is art. It’s the most sophisticated way to build a steel bicycle frame. After carefully mitering the ends of the tubes on a precision machine to make sure the fit is perfect, the frame builder melts a filler metal in the gap between the two pieces at a temperature below steel’s melting point. Getting sculpted joints as those you can see in photos requires a lot of hard work and years of practice.

Carbon monocoque fork

To save grams on the frameset without compromising stiffness, the Power+ Disc features a carbon monocoque fork. The fork is one of the most important parts of the bike for control, so it’s crucial to ensure strength and lateral rigidity.

Front and rear thru-axle

To avoid power loss, eliminate disc-brake vibrations and improve the bike's handling, the Power+ Disc features 142x12 mm thru-axles front and rear.

With disc brakes and more tire clearance, the rear triangle needs to be longer. The rear thru-axle increase stiffness to the rear ends, making the bike prompter in sudden accelerations.

[cnighbor1]

All City Big Block 49cm (barely used, bike mechanic owned) - $1,400 (oakland rockridge / claremont) CA
All City Big Block
track/fixed gear/single speed/tracklocross
Sold complete only, will not part out.

-Surly 1x1 Torsion Bar by Nitto
-Velocity Quill rims laced to All City Sheriff hubs
-Panaracer Gravelking+ 700 x 32c tires(tubeless setup)
-SRAM Omnium 165mm crankset
-Mash front rack blk w/ metal flakes

Will come with both 42t & 48t chainrings, 17t & 19t track cogs, 2 dura-ace lock-rings, Campagnolo 15mm peanut butter spreader wrench, 18t freewheel, owners manual, and more.


Currently set up fixed 42t x 19t. Build is as pinner and true as can be. The photos don’t really do the paint job justice. Rides incredibly smooth. With the ride quality of the big block frame, nice chromo Nitto bars, Oury grips, and the tubeless 32c tires, I can’t see a fixed gear getting much smoother than this. Wish I could keep it, but I need to thin the herd.

Original owner, wheels and bike are assembled by yours truly. I’m 5’8.5” and I love the way it fits me. Would fit heights between 5’6”-5’10“ depending on your proportions and preferences.

Pedals not included
https://sfbay.craigslist.org/eby/bik...196106034.html

[cnighbor1]

Beautiful Hand Made In Italy Mondonico NOS - $750 (Modesto)
I bought this beautiful new old stock Mondonico Adventure frame about 15 years ago built it up with a Campagnolo group group with the exception of the hubs which are Shimano. After building it I hung it up and never rode it. It is absolutely pristine no road rash anywhere on the components. If you are not familiar with Mondonico they are a small very high quality frame building family in Italy. All of their frames are built by the Mondonico family members. They will not allow anyone that is not a Mondonico to put the Mondonico name on a frame they build. Mondonico has built top of the line frames for Torelli. The. Frame measures 60 cm c/c seat tube and 59 c/c top tube. Tires are dry and need to be replaced and no pedals are included.
https://modesto.craigslist.org/bik/d...199730922.html

[mt2u77]

Originally Posted by Clean39T

Almost hit the BIN before I saw the TT length..

https://www.theproscloset.com/produc...oad-bike-large

Hampsten MAX 60x56 w DA9000 mix and nice FLO wheels for $2500ish.

For what it's worth, I set a pixel scale based on the 17cm head tube and I get an ETT of 57.4 cm, which is closer to what my eye test tells me for that frame. Very tempting!

[cnighbor1]

Battlagin - $600
Battaglin. Totally refurbished. new paint, & decals.
https://denver.craigslist.org/bik/d/...197372663.html
Resto- mod with Ultegra 10 speed group and Ksyrium elite wheel set
Columbus tubing 56cm ctc

cash only from buyer
no third party sales
I do not nee help selling this item

[paredown]

In the category of 'if you have the cash and really want one'--this is a pretty rare bird--a NOS 25th Anniversary Merckx MXL (reissue); 56cm ctc; $4150:

https://www.ebay.com/itm/Eddy-Merckx...07d4%7Ciid%3A1