Builder's Spotlight The Paceline Forum Builder's Spotlight


Go Back   The Paceline Forum > Bike Fit

Reply
 
Thread Tools Display Modes
  #1  
Old 09-14-2017, 01:42 PM
tuxbailey tuxbailey is offline
Senior Member
 
Join Date: Nov 2009
Location: Howard County, MD
Posts: 1,861
Increasing steer tube length with new fork. good idea?

I got my bike used and I worked with Smiley to have it fitted.

The bike was slightly larger than my ideal size but we made it work with a 17 degree stem as well as shorter reach bars (Salsa.) We had to use a 17 deg stem because there wasn't enough steer tube to accommodate more spacers.

I have been thinking about getting a new fork in the near future and I plan to keep the steer tube longer so that I can use a 0 deg stem while maintaining the same reach. Is that generally a good idea? getting a 0 deg steam is purely for aesthetic reason since the fit works as it is now. Will the longer steer tube cause any handling changes?

Bike: Merlin Extralight size 55
HTA: 73.5
Current steer tube length (between top of headset and compression cap): 6.5 cm.
Stem length: 10 cm.
Stem angle: 17 deg.

Based on my middle school level geometry calculation I estimated that the new steer tube should be 2.9 cm longer and the 10 cm length would still work.

Should I do this? Any advice?

Thanks,

Johnny
__________________
2012 Guru Praemio R
2001 Jamis Ventura
2012 Trek Cobia
Reply With Quote
  #2  
Old 09-14-2017, 02:03 PM
StephenCL StephenCL is offline
Senior Member
 
Join Date: Jun 2004
Posts: 1,402
Steer tube merlin

Hello,

That Merlin is a great bike. However, as you have noticed, it has a shorter head tube than most other bikes.

My recommendation is that you buy a ti headtube extension from ticycles. This will create the needed stability for the taller steertube.

Then you will need a new fork and stem.

Warm regards,

Stephen
Reply With Quote
  #3  
Old 09-14-2017, 02:23 PM
tuxbailey tuxbailey is offline
Senior Member
 
Join Date: Nov 2009
Location: Howard County, MD
Posts: 1,861
Thanks.

Ti HT extension... that is first time I heard of such things I will check it out.

Thanks.
__________________
2012 Guru Praemio R
2001 Jamis Ventura
2012 Trek Cobia
Reply With Quote
  #4  
Old 09-15-2017, 08:55 AM
OtayBW OtayBW is offline
Senior Member
 
Join Date: Feb 2008
Location: NoBaltoCo
Posts: 3,553
A +17° stem, even with no spacers, seems pretty aggressive. Are you sure that this is the best fitting bike for you? If it is in fact just the steerer tube and not frame size that is the problem, I would definitely consider getting another fork. Good luck.
__________________
The older I get, the faster I was...

Last edited by OtayBW; 09-15-2017 at 08:58 AM.
Reply With Quote
  #5  
Old 11-02-2017, 02:24 AM
Kontact Kontact is offline
Senior Member
 
Join Date: Apr 2011
Location: Sunny Seattle
Posts: 1,866
How is the bike both too large and not tall enough? Usually not enough steerer means it's too small, not too large.

Handling is affect by where your hands are, not the length of bars or stems or steerer tubes.


If you currently have a metal steerer and 6.5cm, one of these will buy you nearly 2cm of height because it is 7.5cm high and can stick up 1.5cm above the steerer:



https://store.velo-orange.com/index....rise-1488.html
__________________
Get off your junk: www.kontactbike.com
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.