#16
|
|||
|
|||
Found the culprit!
Hi OP,
You had me getting concerned. I just checked it was 9-speed. I was at a loss as to what type/model of derailleur the shop installed and still am. I made a list of recommended checks and it turned out that Scott's suggestion solved the concern. I turned up the cable tension on the derailleur and the skipping stopped and all nine speed are back in service! I do appreciate all the thoughts and suggestions. Thank you all. I have an 11-speed Shimano group set on order that will go on the Hilsen but wanted to fix the problem as I will donate the 9-speed system to the local bike co-op as everything is in very good condition. Including the rear derailleur! Again, I appreciate the help very much. Patrick |
#17
|
||||
|
||||
Quote:
Glad you got that figured out.
__________________
🏻* |
#18
|
|||
|
|||
resolved
Hi Weisan,
It was the group that got it sorted. I was just the guy with a bike that needed help! Patrick |
Thread Tools | |
Display Modes | |
|
|