Centaur no longer exists on the campagnolo.com website

[raisinberry777]

Originally Posted by dana_e

disc brake only. How about that?

Maybe some wider Zondas for rim brake?

What is next?

Where is this? Did I miss something?

[oldpotatoe]

Originally Posted by SDJ

Can anyone say if the centaur rear derailleur is compatible with the post 2015 11-speed groups (or pre 2015 11 and 10 speed)?

Am already running the front derailleur with both

It is...Campagnolo, being much smaller, doesn't often make components that are 'stand alone' within a group..which is common with the two, much bigger, 's' brands. You can even use a 11s rear Der with a pre 2009, 10s group.

[C40_guy]

Originally Posted by cgolvin

Wow, they really leapfrogged the competition this time!

Speaking of leapfrogging, you'll need a meter wide rear wheel for that 111 gear cassette.

[cgolvin]

Originally Posted by C40_guy

Speaking of leapfrogging, you'll need a meter wide rear wheel for that 111 gear cassette.

Well, that or a FD that will span 10 chainrings. Holy Q-factor and chainline, Batman!

[gfk_velo]

Sadly, I think rim brake wheel development is at an end ...

[Alexi]

Originally Posted by cgolvin

Well, that or a FD that will span 10 chainrings. Holy Q-factor and chainline, Batman!

10 speed IGH with an 11 speed cassette init?

[Ali-Pacha]

Originally Posted by SDJ

Yeah been following that as well but alas there are no “clear” positive experiences with H11 with centaur (and same in European forums)

Some claim it works others say no go

Might just try it out myself

H11 is officially post 2015 Chorus/Record/Super Record compatible.

As you can see on the other topic, I've tested pre 2015 ergos (Athena Ultrashift 2009 and PowerShift 2013) with post 2015 RD (Chorus 11), it works. But what you can't see is that I also have Centaur 11 on another bike (Look 585). And I've tested my Athena 11 ergos with the Centaur 11 RD : completely different cable pull, sorry.

Ali

[vespasianus]

Originally Posted by SDJ

Yeah been following that as well but alas there are no “clear” positive experiences with H11 with centaur (and same in European forums)

Some claim it works others say no go

Might just try it out myself

I have used H11 shifters with centaur front and rear derailleurs. I also use a Shimano cassette, a KMC chain and a KMC quick link. 20,000 miles and no issues at all.

[PQJ]

Zondas have to be the best value in wheels. Damn shame they won't be made any longer.

[zmalwo]

Originally Posted by callmeishmael

Looks like it. No Zondas either.

This seems a very calculated effort to move Campagnolo fairly definitively as upscale only.

That may be a smart move for them, much as it's personally disappointing.

Good news! Zonda is back on the menu.

[Mr steel]

Originally Posted by zmalwo

Good news! Zonda is back on the menu.

Disc brake only though, and the new ones are quite a bit more expensive

[dana_e]

I need it.

Can you run a ten speed crank with a 12 speed chain?

[dana_e]

wondering