#31
|
||||
|
||||
#32
|
|||
|
|||
Quote:
On my benches, the stuff I use most is front and center, moving outwards and upwards for the tools I use least. In my case: the allen keys, pliers, cable and housing cutters, etc are all smack dab in the middle of my backstop. I'll see what I can do about taking a pic tomorrow (once I've cleared up some of the mess) M |
#33
|
||||
|
||||
Quote:
and 42.4mm (roughly 1 5/8") stainless steel tubes. Rough cost ~100€ without the clamp (I bought a Park Tool PRS-4). i'm going to mount it to the wall using short pieces of the same tube and T-sections, and let the column rest on the floor (Ceiling is too high and ground too uneven), but it would easily be adaptible to wall/floor mounting. I nurse vague thoughts about putting my TIG welder to use and add a toothed rack/crank height adjustment mechanic on it later, but for the first time i'm just gonna use a T section (they have nice sturdy M10 fine threaded grub screws) for adjusting clamp height.
__________________
Jeremy Clarksons bike-riding cousin Last edited by martl; 01-18-2019 at 01:37 PM. |
#34
|
||||
|
||||
Quote:
I know the process all too well. |
#35
|
|||
|
|||
Quote:
__________________
https://www.instagram.com/brysgarage/ |
#36
|
|||
|
|||
Oh yeah - that puppy ain’t going nowhere. +1 for over engineering!
Awesome workspace. Perfect air hose placement. Nice work!! |
#37
|
||||
|
||||
Quote:
The hardware : first mock-up. The horizontal holders i will very likely shorten a good deal, as the clamp has considerable length. (sorry for the ugly wall, the room is an ancient washhouse in the basement of an 100 year old building - that brick cube in the corner is actually under "preservation of historic buildings", and i had a water accident recently)
__________________
Jeremy Clarksons bike-riding cousin Last edited by martl; 01-20-2019 at 04:40 PM. |
#38
|
||||
|
||||
Finally got this put together after some time looking for a flip down solution to work between our basement floor joists.
Pretty handy to have and swing up and out of the way when not using. A furniture leg hinge rated for 120 lbs, Foundation Bike Bench Workstand clamp/end, and some 1-1/2" pipe with flared collar welded together with a pinch bolt. Needs 1 more coat of paint, but I'm happy. Pics: Last edited by kppolich; 08-19-2022 at 11:43 AM. |
#39
|
|||
|
|||
I think BKXC has a video of something similar:
https://www.youtube.com/watch?v=p5ck...pbRndv&index=7 |
|
|