#1
|
|||
|
|||
Bars - Short reach, silver, quill stem, Campy 10s shifters
Weak moment, shouldn't have been looking at the PSA thread. This Casati is coming my way and will need a different stem and bars. What set of bars would be short reach and silver, fit nicely with Campy shifters in terms of how they sit on the ramps, and be 26.0 clamp size? For a stem thinking Cinelli or Casati or Nitto.
|
#2
|
|||
|
|||
soma hwy 1
6061-T6 aluminum - Drop: 130mm - Reach: 75mm - 26.0 or 31.8mm center - Single groove - Black or silver polished finish - 38cm to 46cm (measured center-to-center) |
#3
|
|||
|
|||
I've had good success with Deda Speciale on my Della Santa.
|
#4
|
|||
|
|||
If you don't mind compact bend bars, the Soma Highway One and matching Soma Sutro stem would be a nice silver matching pair.
Deda Speciale are good for a classic bend and then just use whatever 26mm stem of choice (the Deda Murex looks a bit weird). Last edited by raisinberry777; 03-31-2020 at 06:49 PM. |
#5
|
|||
|
|||
Cinelli, 3TTT, ITM stem, Deda bars and whatever matching silver seatpost fits for you.
|
#6
|
|||
|
|||
You folks are awesome.
|
#7
|
||||
|
||||
oh thank goodness. those current bars are an atrocity!
__________________
http://less-than-epic.blogspot.com/ |
#8
|
|||
|
|||
Those bars would work for me. It´s the levers set up wrong that offends the balance of the universe.
To the op: Nitto has some very nice compact bars in 26.0. Silver. |
#9
|
|||
|
|||
They look funky I'll agree, but pretty much what i use.
|
#10
|
||||
|
||||
Nitto M106nas bars and Nitto Pearl stem. Size stem 10mm shorter because of angle.
|
#11
|
||||
|
||||
Add a Nitto S83 seatpost while you’re at it.
|
#12
|
|||
|
|||
That saddle rules!
__________________
This foot tastes terrible! |
#13
|
|||
|
|||
What width bars, length stem? We might have something in our stashes.
|
#14
|
|||
|
|||
Probably an 80mm stem and 42cm bars
|
#15
|
||||
|
||||
Deda 215 shallow. Classic bend, works well with Campy 10 spd.
__________________
Old... and in the way. |
|
|