#1
|
|||
|
|||
Phil VS. King headset/BBcombo
rebuilding my old mtb and due to vanity syndrome want to put on an orange headset with matching outboard BB. I am going to go either Phil Wood or Chris King. thoughts? I've never had a problem with any of my Chris King headsets but have also had very good luck with Phil hubs. which do you pick?
|
#2
|
|||
|
|||
Chris King.
|
#3
|
|||
|
|||
Acros
M |
#4
|
|||
|
|||
I'd pick neither personally.
|
#5
|
|||
|
|||
CK BBs are good if you have the tools to service it (injector and grease gun). You're going for the outboard bb, right?
|
#6
|
||||
|
||||
I have owned both CK HS/BB and PW HS/BB so I can give some insight.
CK headsets are the bomb nothing wrong with them. Many years of use without issue except I had one destroyed after three years of use in horrible conditions. PW BB's are bulletproof no issues after several years of riding one I bought used. I prefer Kogel BBs over all of them. I am not a fan of CK BB although I think they are good. I had one fail in an awful way and never went back. But I know others who use them. I have owned a PW headset for 6 months and it performs perfectly. Either brand is fine but I give the edge to Philwood because I think their BB's are bulletproof. Plus the anodization on Phil Wood products is nicer.
__________________
***IG: mttamgrams*** Last edited by joosttx; 12-11-2018 at 05:51 PM. |
#7
|
|||
|
|||
While I have a high opinion of both companies, I recently was asked to replace a stock outboard bearing with a higher quality replacement.
When I looked into them, I found out they both use adapters to fit the through spindle of cranks like Shimano or SRAM. I wound up with a BB from Wheels Mtg with Enduro bearings. Unfortunately they don't come in colors.
__________________
Forgive me for posting dumb stuff. Chris Little Rock, AR |
|
|