#1
|
|||
|
|||
12mm axle for Enve cross fork
I can’t find the original axle from Enve for sale anywhere. Is there any options out there? I can see Robert Axle has one, but I’m in Europe and can’t find it for sale here. There is other axles out there, but Enve states that the original axle is 128mm in length and the other 12mm axles I can find seems to be a bit shorter then that?
Thanks |
#2
|
||||
|
||||
I have an actual Enve front bolt-on thru axle.
12mm x 1.5 tpi 127mm long without a 1mm scruff washer. With the washer it's 126mm overall length is 131mm DT Swiss makes one with a lever that is 127mm. You should be able to find those in Europe pretty easily. Last edited by Velocipede; 04-15-2021 at 12:27 PM. |
#3
|
|||
|
|||
Thanks, all the DT axles I can find is only 121mm?
|
#4
|
|||
|
|||
Paragon used to make one with a DT head and custom shaft. Their new version with a Paragon head is out of stock. I am using the Paragon DT, so I should have the original ENVE around. I’ll look for it.
|
#5
|
|||
|
|||
I bought another axle that is 127mm and with 14mm therad.
Wrote with Enve and they recommend their own 128 and 13mm thread. The axle i bought seems to fit perfect, sits flush in the end of the fork. I see other brands saying +/- 1-2mm axle difference is ok? |
|
|