Know the rules The Paceline Forum Builder's Spotlight


Go Back   The Paceline Forum > General Discussion

Reply
 
Thread Tools Display Modes
  #1  
Old 07-06-2014, 06:20 AM
Splash Splash is offline
Senior Member
 
Join Date: May 2013
Posts: 1,062
Building Forward Momentum After Hill Apex

I need your tips/advice on building and rolling momentum after reaching Hill Apex.

When I reach all hill apexes, I always slow down, lose energy and ultimately lose any forward rolling momentum I built up well during the preceding climb. This is a weakness of mine and I need to better understand how I can stop losing the forward rolling momentum after I reach Hill Apexes.

From 6:17 of this Youtube link explains exactly what I go through.
https://www.youtube.com/watch?v=fVvr2ihAfAk

The guy talks about increasing leg speed/cadence (by at least 8-10 RPM) first before downshifting into a harder gear - after reaching the hill apex.

Your thoughts, tips and recommendations?


Splash
Reply With Quote
  #2  
Old 07-06-2014, 06:28 AM
Joachim's Avatar
Joachim Joachim is offline
Senior Member
 
Join Date: Jan 2011
Posts: 4,293
Don't slow down, you should time your efforts better so that when you get to the top, you can keep going.
__________________
www.performancesci.com - Performance through science
Reply With Quote
  #3  
Old 07-06-2014, 07:14 AM
Splash Splash is offline
Senior Member
 
Join Date: May 2013
Posts: 1,062
that's just it. i don't slow down during climbs. i only slow down because i cannot sustain the same intensity at this point - as i did with the preceding climb - after i reach the hill apex.

splash
Reply With Quote
  #4  
Old 07-06-2014, 07:23 AM
oldpotatoe's Avatar
oldpotatoe oldpotatoe is offline
Proud Grandpa
 
Join Date: Oct 2009
Location: Republic of Boulder, USA
Posts: 47,047
Ti Designs

Quote:
Originally Posted by Splash View Post
that's just it. i don't slow down during climbs. i only slow down because i cannot sustain the same intensity at this point - as i did with the preceding climb - after i reach the hill apex.

splash
Sounds like a problem for Mr TiDesigns..
__________________
Chisholm's Custom Wheels
Qui Si Parla Campagnolo
Reply With Quote
  #5  
Old 07-06-2014, 08:02 AM
Ti Designs's Avatar
Ti Designs Ti Designs is offline
Ride 'yer bike.
 
Join Date: Dec 2004
Location: Arlington MA
Posts: 6,313
Quote:
Originally Posted by oldpotatoe View Post
Sounds like a problem for Mr TiDesigns..
I put my ex-girlfriend on the back of my tandem, that's not one of the problems we have. Just yesterday we crested the hill and had little problem catching the guys in front of us - they were on motorcycles...


I watched the video, why do so many guys making instructional videos on climbing look like they're linemen in the NFL??? Those who can't do...


The way I see it, the problem is a lack of understanding and/or practice of the pedal stroke. You think there's one way to pedal a bike, if you want to go faster you do it harder, if you want to (Read: need to) recover you pedal softer. And somehow in there you think that your muscles know when to fire and when not to.

Let's look at the two large muscle groups that do most of the work. Most people overuse their quads because they learned how to walk a long time ago and that's the muscle your brain says pushes down on the ground. That may be true when you're standing, but it doesn't work when you're in the saddle. If you're extending from the knee when the pedal is at 3:00, the pedal is going down, you're pushing forward. What's more, you're probably using your quads from 11:00 all the way down to 6:00, and muscles don't get blood flow under tension, so for most of that you're both doing very little useful work and starving your muscles at the same time. You would be much better off breaking the pedal stroke down into smaller segments where each muscle is effective, and teaching your body how to use one (sometimes two) muscle in just that zone. For example, quads can only push forward, so they're only effective from 11:00 to 2:00. Glutes can only push down, so think 1:30 to 4:30, perhaps 1:00 to 4:00 if you run a lot of setback in your position. The real trick isn't getting the muscles to fire, it's getting them to relax at the right point in the pedal stroke.

If you learn how to use each muscle, you also learn that the two large muscle groups are very different. The glutes are huge, wide and powerful, and they leverage your body weight on the pedals They can generate torque, but gravity is a constant, so they're never going to generate much leg speed - at least not on this planet. Quads push the pedal out of the way going over the top - there's almost no limit to how fast this can happen. The quads are a longer, much thinner muscle group so they can't handle the torque output that the glutes can.

So, let's put this into the context of the OP's question - how does one generate speed over the top of a hill. Hills mean torque, torque means adding the momentum of upper body movement with the strength of the glutes. Smaller muscle groups have very little to add here, learn how to keep them relaxed. Going over the top of the hill means you're still in your climbing gear, but the resistance has eased. It's just shifted from the need for torque to the need for leg speed. Switch to the other large muscle group, which hasn't been working going up the hill, and push the pedals forward over the top.

Sadly, this learning is best done in the winter when spending time sitting on a trainer is almost acceptable... By the fall I'll have my pedal stroke class on video.
__________________
If the pedals are turning it's all good.
Reply With Quote
  #6  
Old 07-06-2014, 08:22 AM
1centaur 1centaur is offline
Carbon-loving lifeform
 
Join Date: Nov 2004
Location: Northeastern Massachusetts
Posts: 3,996
One thing you can do in the summer is do twenty seconds of glute pushing and then 20 seconds of quad "kicking" on the flat, and repeat, until you get used to that transition.

Then when getting to the crest and feeling the slope stop requiring the glutes that transition will come more naturally.
Reply With Quote
  #7  
Old 07-06-2014, 09:25 AM
FastforaSlowGuy FastforaSlowGuy is offline
Senior Member
 
Join Date: Nov 2011
Location: Andover, MA
Posts: 2,030
Building Forward Momentum After Hill Apex

Another excellent explanation from Ti Designs. Someone needs to compile his posts into a book on cycling mechanics.


Sent from my iPhone using Tapatalk
Reply With Quote
  #8  
Old 07-06-2014, 02:31 PM
OtayBW OtayBW is offline
Senior Member
 
Join Date: Feb 2008
Location: NoBaltoCo
Posts: 6,153
Quote:
Originally Posted by Ti Designs View Post
The real trick isn't getting the muscles to fire, it's getting them to relax at the right point in the pedal stroke.
This rings true for me - especially having just come in from today's ride with a lot of climbing and sustained effort. I don't know 11:00, 3:00, or whatever - it's all kind of intuitive - but I can feel what you're saying.
__________________
“A bicycle is not a sofa”
-- Dario Pegoretti
Reply With Quote
  #9  
Old 07-06-2014, 02:35 PM
93legendti 93legendti is offline
Adam/SerottaFan
 
Join Date: Dec 2003
Location: Michigan
Posts: 11,871
Quote:
Originally Posted by FastforaSlowGuy View Post
Another excellent explanation from Ti Designs. Someone needs to compile his posts into a book on cycling mechanics.


Sent from my iPhone using Tapatalk
+1.

Today, I climbed Mt. Hermon, in the Golan Heights. Even with a decent warmup, which isn't possible because the town below, Majdal Shams, is bustling and the streets are steeper than the climb, it would be a brute of a climb. The steepest parts always seem to face into the wind. Ti Designs kept popping in my head and I made sure to concentrate on my glutes and quads firing at the appropriate times.
Reply With Quote
  #10  
Old 07-06-2014, 04:07 PM
Splash Splash is offline
Senior Member
 
Join Date: May 2013
Posts: 1,062
TiDesigns.

thank you in taking the time to respond. Biomechanics is a wonderful science!

The information you posted was invaluable, but i need some further clarification if it fully answered my OP....

My OP was to seek advice on building and rolling momentum after reaching Hill Apex, and not before or on (over) the apex.

i notice you referred to my OP as to how does one generate speed over the top of a hill.

Just wanting to check-in to ensure that your reference to over the top of a hill means the same as building momentum after reaching the hill apex?

if not, I would be interested to read any further input you may have....?

Do i need to increase my RPM after I pass the hill apex before i shift down into a harder gear?

Is there anything in that youtube video that is incorrect regarding this topic?


splash

Last edited by Splash; 07-06-2014 at 04:10 PM.
Reply With Quote
  #11  
Old 07-06-2014, 05:20 PM
macaroon macaroon is offline
Senior Member
 
Join Date: May 2013
Posts: 1,085
It's a mental thing. You need to pedal over the top of the climb rather than easing off when you see the top.
Reply With Quote
  #12  
Old 07-06-2014, 05:53 PM
aramis aramis is offline
Senior Member
 
Join Date: May 2013
Location: Santa Cruz, CA
Posts: 369
Quote:
Originally Posted by macaroon View Post
It's a mental thing. You need to pedal over the top of the climb rather than easing off when you see the top.
When I first started riding I had the same problem of not having momentum over the crests. It was because I was pushing too hard (or didn't have the fitness) and/ or mentally stopped pushing at the top. It's better to ease up before the summit and push harder up and over. If you have a power meter just sustain the same power over the top which will usually involve dropping quite a few gears. It's funny, if you look at your power meter going over a crest and you don't think about it you go from say 250-300 watts to 100 watts. It not like if the hill was 100 meters longer you would drop that much power, it's mostly mental ( oh I am done, don't need to push anymore!).
Reply With Quote
  #13  
Old 07-06-2014, 05:54 PM
christian's Avatar
christian christian is online now
Epic=No Smiles
 
Join Date: Aug 2004
Location: Chicago, IL
Posts: 9,109
It's just mental; you just want to spin the same cadence as when climbing and if you're in the same gear, it basically means you fail to put any power to the ground and immediately slow down.

Shift to a harder gear, pick a point 200 meters from the top and keep the power on until you get there.
Reply With Quote
  #14  
Old 07-06-2014, 06:31 PM
Joachim's Avatar
Joachim Joachim is offline
Senior Member
 
Join Date: Jan 2011
Posts: 4,293
I suggest buying a pair of climbing wheels, maybe Lightweight Ventoux. Those will definitely help.
__________________
www.performancesci.com - Performance through science
Reply With Quote
  #15  
Old 07-06-2014, 07:17 PM
shovelhd's Avatar
shovelhd shovelhd is offline
Senior Member
 
Join Date: Dec 2011
Location: Western MA
Posts: 6,379
Ti may disagree but I think it's best to keep the power on and increase cadence as you crest. Shift up only once you hit what would be a high cadence for you.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.