#1
|
|||
|
|||
Help with Campagnolo 11s FD Broken Bridge
I’m sure someone here has made a 3d bridge for their FD. I’m sure this is a common problem with these FD.
If someone has made this piece, can I buy one or two? ————————————————†”————————————————⠀”———————————————— ———— **update 8/16/24 I had some bridges made via 3D Printing and ordered extra. PM me if you’re interested I posted pictures of the bridge installed, which fits perfectly. Page 2 Last edited by corkycalvin; 08-16-2024 at 02:36 PM. |
#2
|
|||
|
|||
#3
|
|||
|
|||
Quote:
Nice that the file is free! |
#4
|
||||
|
||||
That’s the reason I have always used Chorus FD.
|
#5
|
|||
|
|||
FYI - There are a couple ebay vendors in Germany offering this part.
|
#6
|
||||
|
||||
Quote:
https://www.ebay.com/itm/25631233296...Bk9SR6z67_ekZA
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#7
|
||||
|
||||
Your local library almost assuredly does.
|
#8
|
||||
|
||||
If you have a file, you can find someone online to print an item for you, in your choice of material, from carbon impregnated plastic to titanium.
__________________
Colnagi Mootsies Sampson HotTubes LiteSpeeds SpeshFat |
#9
|
|||
|
|||
Shapeways is the likeliest place.
|
#10
|
|||
|
|||
we use the local library - they'll likely have one and someone to help set it up, create the file, troubleshoot, etc. and should be super cheap, like $1/hr of run time. ours will let us leave and call when done, it's great. kids get to print things off and on with zero maintenance or upfront costs.
__________________
-zlin |
#11
|
|||
|
|||
Quote:
|
#12
|
|||
|
|||
#13
|
|||
|
|||
Athena is even better. Chorus uses aluminium alloy cage but Athena uses steel.
|
#14
|
||||
|
||||
Thanks guys for the suggestions--I have one in the parts drawer that needs the clip too...
|
#15
|
|||
|
|||
@CorkyCalvin - I work in the Gardena area and can print one out from a clear material similar to ABS. The clear what we have in the machine, so material choice is limited to that.
To anyone else - Chime in here if you’re SoCal South Bay local and I can make a mini run of parts. Material and machine time comes out to about $18. FYI - I was also in this situation and ended up putting a Chorus 11 FD on my bike to replace the Record 11 FD. I probably should have looked into printing this piece. ������ Last edited by mpken; 08-06-2024 at 04:58 PM. |
|
|