#1
|
|||
|
|||
Tubeless Converts
I just started riding tubeless tires mounted on a Knight Composite Rim on my gravel bike and WOW they are sooooo comfortable and roll so nicely. I’ve never ridden a carbon wheel or tubeless and I’m amazed at the difference from my lightweight alloy rims (custom build Eastons 1300 gr). Is this a combo carbon and tubeless set up? Would like to hear from roadies who have converted. Pressure I know is higher so less comfort there. Has anyone done a tubeless on a 2 way alloy road wheel? How do u like it?
|
#2
|
|||
|
|||
oh yeah, I've been using tubeless on HED Belgium rims and Campy Eurus wheels (these are probably 15 years old. Both set up great with tubeless.
|
#3
|
|||
|
|||
Run tubeless on my Colango C50 with Shamal Ultra 2-way wheelset, with 25mm Schwalble Pro One tires. I use it has my grab and go bike. Easy to setup. I didn't do the floor pump thing etc. Just went and mounted how I do my MTB wheels. Compressor with the valve core out. seat tire bed, deflate, add sealant through the valve, replace valve core, pump up to pressure with floor pump. Easy stuff. Never understood why others waste time with the other processes.
I like the road feel. Find it more striven to PSI then tube. On my other bike I ride tubulars and still prefer those to tubeless. But that may be due to the nice tires you can get in tubular flavor. Either way it suites its purpose and will stay tubeless for the foreseeable future. |
#4
|
||||
|
||||
Quote:
I have a set of Campy Eurus 2way and run them tubeless. I switch between those and a set of Zipp 303 clinchers with Velomax tires. I to use the Zipps more, but still really like the tubeless. I tend to use the tubeless more in iffy weather and early season when more grime on rode. I would like a set of Boras in tubeless if they ever make a tubeless Bora35 I put a set of Shamals on my sons bike last season....I wish I tried your method...I put in the sealant first and then tried the compressor....what a mess!! Sent from my iPhone using Tapatalk |
#5
|
|||
|
|||
I've been running tubeless for about 5 years on cx and road. My biggest complaint is no matter the tires I always manage to get a slash that won't seal and has to be booted. My schwalbe Pro one tires accumulated the most, but also rode the best. So far these bontrager tlr road tires have been pretty consistent in the feel dept and only one slash in 9 months.
|
#6
|
|||
|
|||
I'm a very recent convert. I think all new wheels will be run tubeless from now on, though I won't be dumping what I already have since standard clinchers have worked pretty darn well for me up to this point.
|
#7
|
||||
|
||||
FIFY
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#8
|
||||
|
||||
Quote:
|
#9
|
|||
|
|||
#10
|
|||
|
|||
tubulars, the right tubulars, ride nicer. But not by much. One the other hand, really good clinchers ride really really nice too these days. I'll ride them all but leaning away from tubeless for tires <30mm wide. We'll see, I've got a couple set of IRC 25mm tubeless tires to wear through, and that will take awhile as they wear well and ride nice.
|
#11
|
|||
|
|||
Does tubeless help with flats? I know it’s the way to go for mtb, but these days I wonder if road tubeless couldn’t help with the pesky pinhole punctures I seem to be getting frequently.
|
#12
|
||||
|
||||
#13
|
||||
|
||||
Orange seal is the only worthwhile sealant
|
#14
|
|||
|
|||
Heavily depends on the tire. Nice supple tires are always more prone to picking up those kinda punctures. The sealant should easily seal those up but it does get a bit messy with spray out.
|
#15
|
||||
|
||||
Quote:
|
|
|