#1
|
||||
|
||||
13 Speed Compatible Chainrings
What plays well with Campy Ekar 13? Specifically, tooth to chain. I'm Working with a 86x41BB and looking at implementing a 5 arm crank, 110BCD 1x ring. But all options are open. I'll work out chainline aberrations with spacers to 45.5mm Ekar measures, if I've done my homework. Capisce?
Last edited by YesNdeed; 09-30-2022 at 10:31 PM. |
#2
|
|||
|
|||
Ingrid, and Ratio Technologies are the only chainrings advertised to work with 13 speed Ekar that I am aware of.
I have modified Easton, Wolftooth and Garabuk chainrings with a hand file to get them to work on my Ekar setup. So far so good... |
#3
|
|||
|
|||
I built up (mocked up really) a mountain bike with Campy Ekar. At the time no one had made a smaller sized Ekar compatible chainring (and I really didn't want to custom machine one). I can confirm that the Ingrid chainrings do work. Below is a link to my post with my Ekar set-up and Ekar chain on an Ingrid Chainring.
https://forums.thepaceline.net/showp...&postcount=236 |
#4
|
||||
|
||||
I use the Ratio Technology one on my bike; so far so good.
|
#5
|
|||
|
|||
Ekar rings
In the very near future we are going to introduce a spider that will allow Ekar rings to mount to our crankset. I am kind of excited since I think it is such a great group.
-Drew |
|
|