|
#1
|
||||
|
||||
It's Not Every Day......You Take a Hacksaw to Your Frame
We finally got around to lopping off that 2cm I didn't really need.
|
#2
|
|||
|
|||
I've thought about doing that to a frame or two, but never pulled the trigger.
M |
#3
|
||||
|
||||
It took some time and thinking. We had a friend who is a woodworker cut the blocks so we knew they were square. Meant to do it earlier this year but the season got ahead of us. Actually came up about 6mm short on that guide so had to freehand the last bit. It just meant more milling but worked out fine.
|
#4
|
||||
|
||||
awesome. it's just steel, everything can be fixed, if needed.
__________________
1960 Frejus SuperCorsa |
#5
|
||||
|
||||
Are there non-visible counter sunk screws holding the lower guide plate to the top of the outside wooden block?
__________________
Marc Sasso A part of the resin revolution! |
#6
|
|||
|
|||
That's awesome! What frame is that?
|
#7
|
||||
|
||||
58cm Gunnar Sport. Long story but I used to ride a 56 and ended up with this 58. Fits fine, just too tall up front.
|
#8
|
||||
|
||||
on the other hand, Bilinkey does take hacksaws to people's frames probably close to every day
good work, my gunnar sport is one of the finest riding bikes i have had the pleasure of riding. does yours have a steel fork too?
__________________
http://less-than-epic.blogspot.com/ |
#9
|
||||
|
||||
Quote:
Yes indeed it has a steel fork. Both my Gunnars do. |
#10
|
||||
|
||||
You sir are correct.
|
#11
|
||||
|
||||
There is always more bikes :-)
|
#12
|
|||
|
|||
Wish I'd had the gumption to do this to my Peg last year...
Paint come through it okay? Sent from my Pixel 2 XL using Tapatalk
__________________
Io non posso vivere senza la mia strada e la mia bici -- DP |
#13
|
||||
|
||||
No problem at all. Steady and talented hand (not mine) and a very high quality new blade.
|
#14
|
||||
|
||||
Good for you. Yup, more than a few Gunnars come with long head tubes but it's just a steel tube, consistent thickness, pretty burley to boot. Thanks for documenting the exercise.
The guy doing the work, what kind of degree does he have? (An inside joke, how many bike shop people have college degrees..)
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#15
|
|||
|
|||
I performed this on a couple of Pegs that I once had. A head tube facing tool spiffed it right up.
|
|
|