Builder's Spotlight The Paceline Forum Builder's Spotlight


Go Back   The Paceline Forum > Marketplace > Classifieds (Cycling Products)

Reply
 
Thread Tools Display Modes
  #1  
Old 10-08-2019, 02:00 PM
Thrillho Thrillho is offline
Member
 
Join Date: Jan 2014
Posts: 54
Ira Ryan Lugged XCR Campy EPS 52ish $3000 OBO

I am looking to sell my rain bike. Its a custom IRA Ryan made from Columbus XCR. Unlike most stainless bikes, this one is lugged and has a very classic look. I am 5'8 with a 30" inseam. The Geo sheet is attached below as a pdf. There is plenty of standover and the head tube was made a little taller than a race bike. It is built up as follows:
Campy EPS drivetrain with a mix of Record and Super Record components.
Mavice exalith wheels and pads.
InfoCranks--some of the best power meter cranks you can buy.
Thomson seatpost; stem; bars.
PDW bottle cages and paint matched fenders included.
Pedals not included
Hit me up with questions. More pictures available upon request. I put $10k into this, easy. I'd like to clear $3000 to fund the purchase of my next bike. But please feel free to let me know if I am way out of the market.
Attached Images
File Type: jpeg Ira 2.jpeg (97.7 KB, 592 views)
File Type: jpeg Ira 3.jpeg (57.3 KB, 584 views)
File Type: jpeg Ira 1.jpeg (131.8 KB, 587 views)

Last edited by Thrillho; 10-10-2019 at 12:13 PM.
Reply With Quote
  #2  
Old 10-08-2019, 02:05 PM
hokoman hokoman is offline
Senior Member
 
Join Date: Jun 2004
Location: Brooklyn, NY
Posts: 1,682
Build sheet? What is saddle height in pics and rough standover height?


Beautiful bike.
Reply With Quote
  #3  
Old 10-08-2019, 02:32 PM
instantturtle instantturtle is offline
Member
 
Join Date: Jun 2015
Location: San Jose, CA
Posts: 59
Do you know what the max tire size it’d clear? Thanks!

Ditto - beautiful bike!


Sent from my iPhone using Tapatalk
Reply With Quote
  #4  
Old 10-08-2019, 03:34 PM
Thrillho Thrillho is offline
Member
 
Join Date: Jan 2014
Posts: 54
Thanks for the compliments.

I've always run 23s, which fit fine. I think you could run 25s on these rims with the fenders--I just haven't tried it. I doubt that you could go any bigger without removing the fenders. If you remove the fenders I'm sure you could go 28s no problem. You could also cut and mount the fenders outside of the calipers to get more clearance. Personally, I like the clean look of the fenders under the brakes and accepted a trade-off in clearance.

I'll measure the saddle height tonight and update the post. I'll see if Ira still has the original geo sheet.

Last edited by Thrillho; 10-08-2019 at 03:39 PM.
Reply With Quote
  #5  
Old 10-08-2019, 07:09 PM
nobuseri nobuseri is offline
Senior Member
 
Join Date: Apr 2017
Posts: 518
Clean ride; GLWS
Reply With Quote
  #6  
Old 10-09-2019, 10:25 AM
adrien adrien is offline
Senior Member
 
Join Date: Nov 2015
Posts: 364
Lovely, I remember seeing it on his site.

I have two of Ira's before Breadwinner, and they are sublime. Alas, they're also 59-60s.

GLWS.
Reply With Quote
  #7  
Old 10-09-2019, 10:27 AM
Thrillho Thrillho is offline
Member
 
Join Date: Jan 2014
Posts: 54
Quote:
Originally Posted by hokoman View Post
Build sheet? What is saddle height in pics and rough standover height?


Beautiful bike.
I measure 65cm from the center of the BB to the saddle. I also measure about 49.5 cm from the tip of the saddle to the center of the bars. Of course is not an integrated seat post so you can adjust up or down as much as you want.
Reply With Quote
  #8  
Old 10-09-2019, 10:33 AM
Thrillho Thrillho is offline
Member
 
Join Date: Jan 2014
Posts: 54
Druptight--clear some space in your inbox so I can reply to your PM.
Reply With Quote
  #9  
Old 10-09-2019, 06:16 PM
Thrillho Thrillho is offline
Member
 
Join Date: Jan 2014
Posts: 54
Quote:
Originally Posted by hokoman View Post
Build sheet? What is saddle height in pics and rough standover height?


Beautiful bike.
Build Sheet attached. Ira generated this for me on a Breadwinner template--so don't be confused by this.
Attached Files
File Type: pdf richard lorenzslant6xcr.pdf (33.2 KB, 77 views)
Reply With Quote
  #10  
Old 10-09-2019, 06:45 PM
woodworker woodworker is offline
Senior Member
 
Join Date: Nov 2013
Posts: 168
Beautiful bike. Based on the build sheet, doesn't it have a 55 effective top tube? So shouldn't it be 55ish, not 52ish? You might get more interest, as that's more in the middle of the bell curve.
Reply With Quote
  #11  
Old 10-09-2019, 06:57 PM
Thrillho Thrillho is offline
Member
 
Join Date: Jan 2014
Posts: 54
You may be right. Im going off the seat tube but the specs speak for themselves.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.