|
|
|
|
#31
09-30-2019, 01:04 PM
|
|||
|
|||
|
Even weirder - I had one of these cassettes on my Anderson for a few hundred miles, maybe a bit more. Swapped it out for an 11-40 for D2R2. Just swapped it back on last night. Before, no clicking, and now it clicks! Same bike and all bits the same.
|
|
#32
09-30-2019, 01:21 PM
|
|||
|
|||
|
To the OP: I dont remember the circumstances, but I remember feeling a similar "runs rough" drivetrain a few times. I could feel like some kind of binding through the pedals and there is a kind of droney noise associated with it.
I dont remember what I did to fix it, unfortunately.
|
|
#33
09-30-2019, 03:24 PM
|
|||
|
|||
|
So I put it up in the stand and watching carefully could see that there are two teeth on the 27T cog itself, not an adjacent cog, that lift the chain momentarily. I fussed with the cable adjuster and eventually made it stop. Fussy!
|
|
#34
10-01-2019, 03:15 AM
|
||||
|
||||
|
Quote:
|
|
#35
07-31-2020, 06:42 PM
|
||||
|
||||
|
Having this exact frustrating problem now.
SPP
|
|
#36
07-31-2020, 09:57 PM
|
|||
|
|||
|
I have this cassette on two bikes. In the stand one can see the chain pick up on a tooth in the third largest cog, then taking up a smidgin more tension in the cable makes it go away. Only to re-appear a few hundred miles later, and repeat the
process. Quote:
|
|
#37
07-31-2020, 10:27 PM
|
||||
|
||||
|
Quote:
Last edited by charliedid; 08-01-2020 at 08:15 AM.
|
|
#38
08-01-2020, 04:35 AM
|
||||
|
||||
|
Quote:
I can watch it happen in the bike stand right before my eyes. And, of course, hear it while I'm pedaling. and it seems the R8000 cassette is unavailable in 11-34 to even replace it. Probably around 200 miles tops on it...hoping it will just go away (but I've heard that before). SPP
|
|
#39
08-01-2020, 05:44 AM
|
|||
|
|||
|
ive also got the clicky thing on my 11s campy bike. really annoying considering everything is brand new. shoulda stuck with 10s
|
|
#40
08-01-2020, 06:43 AM
|
||||
|
||||
|
Quote:
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo
|
|
#41
08-01-2020, 08:17 AM
|
||||
|
||||
|
Quote:
|
|
#42
08-01-2020, 08:30 AM
|
||||
|
||||
|
With chain 3rd cog down, one link will ride up momentarily on the same tooth (marked with Sharpie) of the 4th cog down.
Happens with big as well as small chainring up front (also new). Runs fine (smooth and quiet) in all other gears, including the 4th cog down. SPP
|
|
#43
08-01-2020, 08:31 AM
|
||||
|
||||
|
Quote:
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo
|
|
#44
08-01-2020, 08:40 AM
|
||||
|
||||
|
Quote:
|
|
#45
08-01-2020, 11:13 AM
|
|||
|
|||
|
Pete, I'm running KMC chains, and this happens on my HG800 cassettes, and the solution is always a tad more cable tension.
Quote:
|
 |
|
|
Linear Mode
