#1
|
|||
|
|||
Recommended Rear Pulley Derailleur Cage Replacement
Hello,
I have a Shimano Dura-Ace RD-7900 10 speed groupset mounted on my bike. Unfortunately, the one of the plates onto which the pulley wheels are mounted broke. I can either get a used rear derailleur on ebay for ~$150 or I've seen some cheapo Chinese manufactured carbon fiber, anodized cages which look a little over the top: https://www.ebay.com/itm/292190039814. What do people here recommend? Thanks! Gio |
#2
|
|||
|
|||
I've ordered just the inner cage plate for several Shimano derailers if that's what you need, and they are really cheap as in about $15 depending if steel or alloy.
The Dura-Ace cage parts should be available, not sure though on their pricing. Which plate is damaged? |
#3
|
||||
|
||||
Shimano USA has around 30 7900 inner plates in stock at the moment, should cost you thru your lbs around $76
Part number is Y5X098130
__________________
http://www.myspace.com/thedolloff Last edited by Alexi; 03-19-2023 at 04:51 PM. |
#4
|
|||
|
|||
#5
|
||||
|
||||
Gotta wonder..why 30, for this part in a rear der that was last made 11 years ago(?)...
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#6
|
||||
|
||||
Quote:
A) Failed so often that they mad a ton of them and these are the left overs. B) Failed so infrequently that the few that they made have a bunch of left overs.
__________________
http://www.myspace.com/thedolloff |
|
|