#1
|
|||
|
|||
Can I fix this?
My frame bag did it...
Any advice for making the marks go away from my Ti frame? Last edited by kookmyers; 04-25-2017 at 10:52 PM. Reason: Titanium |
#2
|
||||
|
||||
If that is a bare titanium frame, a "very fine grade" Scotch Brite pad will buff it right out.
|
#3
|
|||
|
|||
For once, "that'll buff right out" is the correct answer!
|
#4
|
|||
|
|||
Try some acetone first then if not one of these and a tiny bit of Silvo or Brasso to give it that lust.
__________________
Prisoner of Her Majesty |
#5
|
|||
|
|||
Awesome!
|
#6
|
|||
|
|||
that green pad
might surprise you if you're not careful. i might suggest a less aggressive color. i think gray or purple might be less harsh. you might over brighten that spot and then think you need to do the whole bike . but bare brushed ti still the best thing going.
if you have not done so, some alcohol or paint thinner with some elbow grease might also do the trick.
__________________
Crust Malocchio, Turbo Creo |
#7
|
|||
|
|||
Dont use the green scotch brite, it is to course. U need the light brown pads, It is a finer grit and won't scratch like the green stuff.
We use scotch brite at work to buff/polish SS after tig welding. |
#8
|
||||
|
||||
Quote:
__________________
Cheers...Daryl Life is too important to be taken seriously |
#9
|
|||
|
|||
I agree with the others, the green is too aggressive. Try a pencil eraser, or some alcohol, or some degreaser, or some pledge, or get gently creative. Use frame protective tape to prevent this next time. Put it on if it stays this bad or you make it worse and only you will know. Velo stay top is my blurry clear textured favorite.
__________________
I can tune a trombone easier than a derailleur. |
#10
|
|||
|
|||
GooGone works well for me.
|
#11
|
|||
|
|||
I've been using the green pads on Ti bikes for the last 12 years, in the shop I work for and on my own (numerous) Ti bikes with no problems...
It's all in the hand action....Ha! But those with a less dainty hand, this is what you really need, I agree.
__________________
Prisoner of Her Majesty |
#12
|
|||
|
|||
I am starting to think the picture is not worth a thousand words. A want to clarify that nothing has been added to the frame (goo, gunk, sticky stuff, dirt) that needs to be removed. The strap for the frame bag appears to have "polished" the metal.
My apologies if this was already clear. I'll give some of these suggestions a try this weekend. If it comes off, i guess i should tape it up to prevent it from happening again if i am going to care about it (i do). |
#13
|
|||
|
|||
Just leave it.
This is surely one of the main benefits of a Ti frame; you can mark it and scrape it without causing any damage. |
#14
|
||||
|
||||
+1 on green pads. Used them successfully for years.
Sent from my iPhone using Tapatalk
__________________
©2004 The Elefantino Corp. All rights reserved. |
#15
|
|||
|
|||
Has anyone tried a fiberglass pen? I had one a long time ago to take out the scratches from my ti seamaster. Worked great for that...
|
|
|