#1
|
|||
|
|||
Straight+tapered fork/hs question
I currently have a 1 1/8 headset installed running a straight fork. the ht is 44mm so it can accept either straight or tapered. To run the tapered suspension fork I'm going to put in the appropriate bottom headset cup.
I'd like to be able to swap between the non-tapered rigid fork easily once the headset has been updated. is there a crown race or something that i can install on the straight fork that will allow it to plug and play on the new HS set up? Last edited by cinema; 02-11-2016 at 02:22 PM. |
#2
|
|||
|
|||
Yes Chris king headset and you will be able to get a crown race for the 11/8 fork that fits it straight into your new 1.5 taper headset.
|
#3
|
|||
|
|||
sorry i forgot to mention the headset is cane creek 1.125. i was told i could just order the bottom part that would allow the tapered fork to work?
|
#4
|
|||
|
|||
Quote:
I know cane creek also offers a crown race that will fit the 11/8 fork into your new cane creek 1.5 bottom cup but i have no personal experience with this. But i have heard they do this more than once so I'm sure others will chime in shortly and confirm. |
#5
|
|||
|
|||
One of these crown races, I think? http://fanatikbike.com/product/cane-...-race-9467.htm
Call them, they can confirm. |
#6
|
|||
|
|||
I did this just last week. Works like a charm.
http://www.jensonusa.com/Cane-Creek-...ion-Crown-Race |
#7
|
|||
|
|||
PERFECT cheap too, love cane creek. Thanks you guys
|
|
|