#16
|
|||
|
|||
Quote:
|
#17
|
||||
|
||||
Same here.
|
#18
|
|||
|
|||
KMC missing link won’t work
Decided to try the 12 Missing link on my 12 speed campy. The problem is that the pins for the link catch the rear derailleur upper pulley wheel plate.This happens in all the gears. The missing link plates seem very close in width to the campy links but the pins stand too proud. Lesson learned.
|
#19
|
|||
|
|||
I'm using a KMC 12 speed quick link with a Chorus 12 speed chain. No problem whatsoever.
__________________
No signature |
#20
|
|||
|
|||
That's an interesting issue...
And is interesting what the other forumite says too... Looks like 12 speed will figure it out little by little when the guys starts using it more and more. Pls sell your record 10 stuff to me please, and really cheap too :P |
#21
|
||||
|
||||
Quote:
http://www.kmcchain.eu/connector-KMC...cross-12_speed Tim Last edited by mcteague; 08-11-2019 at 12:27 PM. |
#22
|
|||
|
|||
I'm also using a KMC CL552 link on my campy 12 chain. Works fine, but the width across the pins is wider than the rest of the chain. All modern links have flush pins, so they don't protrude.
A sram axs link is too narrow. Last edited by Dave; 08-11-2019 at 03:20 PM. |
#23
|
|||
|
|||
The link simplifies chain cleaning, but if that's not an issue with you, pin peening is just fine.
|
#24
|
||||
|
||||
Quote:
Tim |
#25
|
|||
|
|||
VERY true (I own the Campy...absolutely the finest, most precise chain tool in the world. Period.).
|
#26
|
||||
|
||||
Agree...use the peen tool when chain is new..take off to clean, then use a link(KMC)...
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#27
|
|||
|
|||
More info?
Quote:
Hit the upper pulley derailleur plate. Did you have to modify anything on yours? |
#28
|
|||
|
|||
The wider pins on the link...
[QUOTE=Dave;2578273]I'm also using a KMC CL552 link on my campy 12 chain. Works fine, but the width across the pins is wider than the rest of the chain. All modern links have flush pins, so they don't protrude.
A sram axs link is too narrow.[/QUOT I wonder if there is some variation on the KMC pin width? Since it doesn’t have flush pins 0.5mm on one side or the other would be enough to explain why some aren’t having the clearance issues. Last edited by Yerma; 08-21-2019 at 07:46 AM. |
#29
|
|||
|
|||
I'm using the SRAM "Eagle" version quick-link with SR-12. No problem whatsoever.
|
#30
|
||||
|
||||
Quote:
Tim |
|
|