|
#1
|
|||
|
|||
Campy 12 speed chain - peen or quick link?
Building up bike with Campy Record 12 speed and wanted to see what experiences forumites have had regarding the chain. Manual says it needs to be installed with the special pin and be peened, but I do not have a peening tool and hoping not to need to purchase one.
Anybody have any experience with a quick link that would be compatible with the campy drivetrain? I see SRAM has one for their 12 speed eagle drivetrains. I think KMC also has a 12 speed chain, but have not found a source for just the quick link. May be worth it to bring it to the LBS to have the chain installed, but concerned about their fluency with Campy speak. Last edited by radsmd; 01-27-2019 at 01:15 PM. |
#2
|
|||
|
|||
NO idea about campy 12 but if i had one group I would go with the missing link just because if you need to remove the chain you can do that in a second. I do not even know why campagnolo still make pins, nobody use them at all. Personally never used one all the way up to 11 speed.
|
#3
|
|||
|
|||
Quote:
https://www.biketiresdirect.com/prod...yABEgI-E_D_BwE Personally, I just get a KMC with the master link and be done with it! |
#4
|
|||
|
|||
The 12spd chain uses the same 11spd chain tool, Campag will never go for a quick link as they view it as a weakness in a chain
|
#5
|
|||
|
|||
The sram 12 link would come closest to a proper fit. When 11 speed first came out, I got by with a wipperman 10 link. It was too wide, but never caused a problem.
|
#6
|
|||
|
|||
I did the same.. used 10 speed missing links with 11, got tad noisy at times but worked fine. No idea how an 11 missing link will work in a 12 speed chain tho
|
#7
|
|||
|
|||
Can’t find the KMC missing link for 12 being sold separately yet.
I have a couple of old Park chain tools, but none that have the peening capability. Hate to spend $60+ for a tool that I’d use so infrequently. Looks like I’ll be calling up to Campagnolo NA to see if they have any recommendations on good wrenches in the San Diego area. |
#8
|
|||
|
|||
You could just buy a KMC 12 speed chain and use it.
https://www.jensonusa.com/KMC-X12-12-Speed-Chain KMC claims compatibility with SRAM and Campy 12. Here's a source for the links, alone. https://www.amazon.com/KMC-Missing-L...SIN=B07MTPYX49 Last edited by Dave; 01-27-2019 at 05:29 PM. |
#9
|
|||
|
|||
Quote:
|
#10
|
|||
|
|||
See my revised post.
|
#11
|
|||
|
|||
I've peened all my Campy 11 chains with the campy chain tool for the past ten years, at least a dozen chains, never had one fail. I've been carrying the same KMC 11 link in my tool bag for a decade.
My gravel bike has Shimano 11 and the replacement chains have all had links instead of pins. |
#12
|
||||
|
||||
Same here.
|
#13
|
|||
|
|||
KMC missing link won’t work
Decided to try the 12 Missing link on my 12 speed campy. The problem is that the pins for the link catch the rear derailleur upper pulley wheel plate.This happens in all the gears. The missing link plates seem very close in width to the campy links but the pins stand too proud. Lesson learned.
|
#14
|
|||
|
|||
#15
|
|||
|
|||
...just buy the proper tool. It will pay for itself in spades and assist u in getting the job done correctly. U can find it for less than $150 from UK outfitters. I assume u just spent $2K on ur new 12 speed gruppo...why skimp on THE most important part of ur drivetrain..??
|
|
|