Are there any 26.0mm flared bars?

[mistermo]

These Uno Curved bars on ebay look pretty nice, and come in 25.4 and 31.8. No 44cm size though. (Drawing shows 31.8 clamp)



UNO CURVE BARS

[kiwisimon]

Originally Posted by chrismoustache

On One Midge? They might be 25.4 though...

yep older Midges are 25.4 and new ones 31.8.

You might be better looking for 25.4 with shims
Nitto make a well flared bar Nitto RM-3

[Look585]

These look interesting. Does anyone know if the width is measured at the "hoods" (w1 in the schematic) or "drops (w2 in the schematic)??? I like narrow bars, but 380mm at the drops would be *very* narrow!

Originally Posted by mistermo

These Uno Curved bars on ebay look pretty nice, and come in 25.4 and 31.8. No 44cm size though. (Drawing shows 31.8 clamp)



UNO CURVE BARS

[shoota]

Originally Posted by mistermo

These Uno Curved bars on ebay look pretty nice, and come in 25.4 and 31.8. No 44cm size though. (Drawing shows 31.8 clamp)



UNO CURVE BARS

Originally Posted by Look585

These look interesting. Does anyone know if the width is measured at the "hoods" (w1 in the schematic) or "drips (w2 in the schematic)??? I like narrow bars, but 380mm at the drops would be *very* narrow!

There's no way those bars have as much flare as the schematic says. You can tell that just from the pictures of the bars.

[mistermo]

Originally Posted by mistermo

These Uno Curved bars on ebay look pretty nice, and come in 25.4 and 31.8. No 44cm size though. (Drawing shows 31.8 clamp)



UNO CURVE BARS

I took a risk, ordered these bars, received them and they DO NOT have a flare.

[Look585]

Originally Posted by mistermo

I took a risk, ordered these bars, received them and they DO NOT have a flare.

As did I. No flare and *not* 25.4mm as advertised (Measured 25.8-26mm). Shape is very similar to the Soma Hwy1, though the drops are shorter (extend less back toward the rider).

[shoota]

Originally Posted by shoota

There's no way those bars have as much flare as the schematic says. You can tell that just from the pictures of the bars.

Originally Posted by mistermo

I took a risk, ordered these bars, received them and they DO NOT have a flare.

Don't say I didn't warn ya.

Edit: looks like they updated the listing and took out the flared schematic and put in a note about them measuring closer to 26.0. Brutal.

[LeMond123]

I like my Nitto Noodles. Slight flare. Moves back towards you a tad. Flat top/ramps (not for everyone of course). Con: no indentations for cables, so I run brake on back and shifter on front, makes it look like a thick, wrapped aero bar. If you want I can snap a picture tonight, just finished the bar tape on a Trek project bike. YMMV

https://www.rivbike.com/products/nitto-noodle-handlebar I have to agree with Rivendell, I love riding in the drops on these bars.

[mistermo]

Originally Posted by shoota

Edit: looks like they updated the listing and took out the flared schematic and put in a note about them measuring closer to 26.0. Brutal.

Yes, they did this last night after I complained that I didn't get the bars as shown in their schematic, as posted here.

[owly]

Dixna Cross Bandy also comes in 26.0.

Best suited for smaller? riders as the M is 385mm top / 470mm ends.
In addition to the smaller reach and drop: 60mm / 100mm.

Rather long ends.

S available also, which is 333mm!