Frame mount for Silca Pocket Impero pump

[dbnm]

Anyone know if there is a frame mount for the pocket Silca Impero pump?

I can't seem to find one.

[Mark McM]

There are some generic frame pump mounts that might work, such as the TwoFish BIke Block Pump Holder:

[thirdgenbird]

I don’t think silca has one but you should be able to match up the diameter with something else. If you get a measurement, I can check what I have.

[Dino Suegiù]

While Silca state it does not work with the "Pocket Impero" pump, see if in fact a "Silca Tattico Bracket Mount" might work for you, by either gluing in rubber shims if you need to slightly decrease ID or by heating/spreading if you need to slightly increase the Ø of the clamping area.

These things mount at the two bottle cage bolts, and are very secure. If you do not find or want official Silca ($), there are many versions available on eBay, etc. I bought several China generics for my other frames, and they work perfectly on my single "Tattico" pump when I switch it from bicycle to bicycle.

I do not know what the Silca "Pocket Impero" Ø measures, but for your reference my Silca "Tattico" tube/"Tattico Bracket Mount"/China generic mounts Ø measures 21mm, so you can measure your "Pocket Impero" tube Ø and work from there. Center-center on the mounting holes = 65mm; out-out of the clamps themselves = 65mm as well.