#1
|
|||
|
|||
Optimal seat bag tool setup
I’ve been designing and sewing seat bags and tool rolls lately, and it’s got me thinking about the optimum load out for both day rides and bigger jaunts.
Day ride: One tube One lever One Co2 and chuck Small multi tool Patch kit. I don’t like how bulky the patch kit is and the multi tool is always a trade off between leverage and size. I’m thinking I’ll switch to a small flat zipper bag for patch stuff instead of the patch kit box and maybe get a driver/bit multi tool setup? MTB/backcountry/overnight: Two tubes One lever Mini pump Small multi tool Patches and a boot Tubeless plug kit Chain pliers? I don’t have these yet but am eyeing the Wolf Tooth ones. Small bottle of Stans Chain breaker? Is there a mini one or a good multi tool with one? Spare cleat bolt? Are there any other spares people view as essential for this type of kit? What do you carry for each use case? Anyone have recommendations on tools that reduce redundancy and work well at a low weight? |
#2
|
|||
|
|||
In terms of bag design...I favor models that accommodate two tubes, regardless of anticipated ride duration.
Most of us have experienced the bad-luck-double-whammy of two punctures happening on a single ride. |
#3
|
|||
|
|||
I always liked to have the ability to kind of strap a mini pump to the outside of the bag in order to save space on the inside.
|
#4
|
||||
|
||||
+1 which is why I like the Castelli seat bag. Also, I carry at least two cartridges since you can easily waste one if you didn't get it right on the first try (tire bead not hooked correctly allowing inner tube to come out, or tubeless if the tire doesn't seat correctly).
__________________
My Bikes |
#5
|
||||
|
||||
Quote:
And if I'm feeling paranoid I'd rather carry a third tube than a patch kit, 'cuz I'd still rather change a tube on the side of the road than fix a tube on the side of the road. And I always take two levers...because two barely takes up more room in the pack than one, but when dealing with a stubborn tire the difference is more than 2x |
#6
|
||||
|
||||
FYI, the wolf tooth pliers are very good and do double duty as an excellent tire lever. very light too. (they have a built in valve core removal wrench too)
__________________
http://less-than-epic.blogspot.com/ |
#7
|
||||
|
||||
One tube
Two CO2 cartridges (in case I fat finger the first one) Rema patch kit |
#8
|
|||
|
|||
This tool looks fantastic. I need to add this to my tool kit.
|
#9
|
|||
|
|||
Quote:
Have you used it as a tire lever? I'd be worried about damaging the tire and/or rim using a metal lever. Chris |
#10
|
|||
|
|||
It’s really good. I do carry a tire lever still though because I don’t like using a metal tire lever on my wheels
|
#11
|
||||
|
||||
just a comment, I NEVER put tubes in the seatbag after having one puncture just by bouncing around in it. Bonus, I get to use a really small bag (lezyne micro), 2 levers, 2 co2, 1 head, 1 multi tool and 1 stick on patch kit. Tube in box in pocket for me.
|
#12
|
|||
|
|||
how did it puncture?
|
#13
|
|||
|
|||
Quote:
Instead of a patch kit, I just get a couple glueless patches. I know they can stink, but I want fast and hopefully good 'nuff to get home. Lot less space that way. Small multi-tool.. my go-to is the SKS Tom 7 tool. |
#14
|
|||
|
|||
Likely friction or contact with something else in the bag.
That's why I stuff my TWO tubes into an old cycling sock with the excess length cut off. I stitch on some Velcro tabs to close the sock. The sock protects the tubes. I also carry a patch kit because as Blue Jays pointed out, there are those "bad-luck-double-whammy" days. But that's a last resort as I mostly patch the tube at home. I carry two levers because I can't find the third one and I find stubborn tires a pain to remove with just two. And yes; I've broken levers on the road. And a pump. Because I've seen CO2 inflators fail. They add waste to the environment, and sooner or later the cartridges purchased would exceed the cost of my pump. And a multi-tool.
__________________
http://hubbardpark.blogspot.com/ |
#15
|
|||
|
|||
Haven't tried yet, but I like the idea I read about saran wrapping a tube(s).. keeps it tight and small, and I guess depending on how many wraps, offers some protection.
|
|
|