#1
|
|||
|
|||
Hirame chuck question
I have been through several Jaco presta pump heads that I use on my inflator connected to a compressor. They work ok for a few months and then start leaking making them worthless.
So I am looking for something more reliable. I was looking at the Hirame or Silca Hiro. One review I read said that it does not depress the valve when locking it on and because of that it does not work with a pressure gauge. I have a digital gauge on my inflator so that would be a no go. Is this really the case? Is there any preference for Hirame or Silca? The Silca is on sale right now for 1/2 price at $35. Another thought is to use a Topeak smart head which I have on a floor pump and it has been good. Thanks |
#2
|
||||
|
||||
Go with the Topeak.
__________________
🏻* |
#4
|
||||
|
||||
Difficult to find a new washer for the Hirame. Not so for the Silca.
That said, I've been using mine for about 10 yrs and am still on the original washer... the Hirame is a great pump head. I'm using it on on old Lezyne that has a gauge. The gauge reads accurately. If you've got a sticky Presta valve, it does help to push down the valve to free it up before inflating. Otherwise you can get to 150 psi before it pops open. True for other pumps I've used as well, for that matter...
__________________
Old... and in the way. |
#5
|
|||
|
|||
With respect to the Hirame, that claim is false. Had one for 15+ years now and the pump's pressure gauge works fine.
Can't speak to the Silca Hiro. |
#6
|
|||
|
|||
Quote:
Most high pressure tires will lose a PSI or two overnight, so if you adding a PSI or two to restore the tire pressure, the pump gauge will work fine. |
#7
|
||||
|
||||
for a compressor? The simpler Prestaflate is my choice.
__________________
http://less-than-epic.blogspot.com/ |
#8
|
|||
|
|||
Thanks, I think I will give the Silca a try since it is on sale.
|
#9
|
||||
|
||||
I have Hirame for both presta and schrader on a decades old Joe Blow and both work fine with the gauge.
I think I bought the presta from someone here. I got the schrader guts from this site which also sells the gaskets. https://www.tracksupermarket.com/ |
#10
|
|||
|
|||
My set up is Silca pump and hirame head. Happy days. No experience with digital pressure gauge.
Cheers Hainy Sydney, Australia |
#11
|
||||
|
||||
Quote:
__________________
Old... and in the way. |
#12
|
|||
|
|||
#13
|
|||
|
|||
Prefer the Hirame to the Silca, tried both.
+1 for the EVT |
#14
|
|||
|
|||
This simple trick is standard practice for me.
|
#15
|
|||
|
|||
Received the Hiro chuck.
It does not work with my digital inflator. As soon as I stop putting air in pressure drops. I suspect since the air is cut off by the inflator the presta valve does not stay open. Anyway it is up for sale in classified’s. Silca does not accept returns. |
|
|