#1
|
|||
|
|||
110 bcd Shimano compatible chainrings...
Hi all,
I am curious if Shimano (or anyone else) makes a 48 or 46 tooth 110 bcd spacing chainring that is compatible with the new Shimano FC-R700 comapct crankset. Please tell me where I can buy such an item (if one exists) and if I need different chainring bolts. I think that if I have a 48/34 or 46/34 that I would use the large chainring more as I am a real spinner. With a 50/34 and a 12/25 I tend to run out of gears in the 34 and cant find anything low enough in the 50 to make me happy to spin at a very high cadence. As always, thank you all in advance for your knowledge and experience, Steve
__________________
Livin’ the dream ( just like Mike ) |
#2
|
|||
|
|||
NOS 110mm 48t XTR rings seem to pop up on Ebay from time to time and might still be available special order.
|
#3
|
|||
|
|||
Like this: http://www.beyondbikes.com/BB/ItemDesc.asp?IC=QCR1985
Is this compatible??? Will it look stupid??? Anything else that would work??? Thanks, Steve
__________________
Livin’ the dream ( just like Mike ) |
#4
|
|||
|
|||
I have FSA 46/36 on my cross bike and I believe they are 110.
Why wouldn't these work? Bruce
__________________
I'm sorry Dave, I'm afraid I can't do that. Can't we just talk about this for a moment? |
#5
|
|||
|
|||
Here's another picture and a better price.
http://www.cambriabike.com/shopexd.asp?id=8596 Cambria also has Race face rings: http://www.cambriabike.com/shopexd.asp?id=26406 They carry Ringle and Real rings in 48 to. I don't know how they will look on an R-700 but the stock rings are pretty chunky so they might work quite well. |
#6
|
|||
|
|||
I just measured an old XTR 48t ring and it is 18mm wide below the chainring bolt hole where the ring merges with the crankset arm.
|
#7
|
|||
|
|||
I have an XTR SG-X 48T 110mm 5-arm chainring in very good shape, it is an M900, so it is for 8-speed. The crankarm pin is missing because I ran it on a Ritchey. PM me if you would like to try it out.
|
Thread Tools | |
Display Modes | |
|
|