Off-center bottom backet

[General69]

Thanks for the advice. I put the drive side on first. Then I put the bb tool in a vice and use the frame as leverage. It was a risk of cross threading but I was careful to keep everything level. Pic shows as far as it would go. Works well and hopefully it comes back out a few years later.

Sent from my SAMSUNG-SM-G920A using Tapatalk

[General69]

Originally Posted by General69

Thanks for the advice. I put the drive side on first. Then I put the bb tool in a vice and use the frame as leverage. It was a risk of cross threading but I was careful to keep everything level. Pic shows as far as it would go. Works well and hopefully it comes back out a few years later.

Sent from my SAMSUNG-SM-G920A using Tapatalk

It was a shimano bbun55 btw


Sent from my SAMSUNG-SM-G920A using Tapatalk

[General69]

Originally Posted by icepick_trotsky

What's going on with that double bottle cage?

It's a heavy guage ss steel bar with slots bent in a U shape. There aren't any bottle mounts on seat tube so this was the best solution

Sent from my SAMSUNG-SM-G920A using Tapatalk

[Fatty]

Originally Posted by icepick_trotsky

What's going on with that double bottle cage?

That's for the two fisted drinker.