Sklar

[AdamSklar]

Hi Everyone,

Trying to post over here a little more these days. Here is some fun stuff from the past few months.

Steel All-road





Lori's Ti All road




https://www.sklarbikes.com/blog/skla...ravel-bike-mal




Bill's Titanium Travel Bike

[AdamSklar]

Trying out some new geometry concepts on this bike. Also first go with the new 3D printed chainstay yokes. So far so good!

[ultraman6970]

Ultra likes....!!

[boomforeal]

lovely bike adam. care to share what geometry stuff you're working on with this?

[Andy sti]

Such great stuff. Thanks for posting!

[AdamSklar]

Thanks all!

Originally Posted by boomforeal

lovely bike adam. care to share what geometry stuff you're working on with this?

Here are the important numbers on this bike:


I had pretty similar front end geo on my squish bike that I built last Spring and really loved it. So far it's feeling awesome on the hardtail, though Montana riding in the Winter is pretty limited.

[andeww]

Are those 29x2.6 Minions? how do you like them?
i am considering going from 3.0 down to something a tad smaller and knobby.

[AdamSklar]

Originally Posted by andeww

Are those 29x2.6 Minions? how do you like them?
i am considering going from 3.0 down to something a tad smaller and knobby.

These are actually the 3.0's. They measure 2.8 though. I have run the 2.6's on other bikes and like them, though they only measured in at 2.5" for me, they are a touch larger diameter than the 2.5" WT, but I wish the 29x2.8" Minions were easier to find these days. I found that to be a good size.

[AdamSklar]

Steel gravel frame headed to get painted by Pucci. Real excited to see what he does with it.

[charliedid]

So great

[Sjambok]

Awesome workmanship!

Also enjoyed your podcast episode of "We Got to Hang".

[dvancleve]

Love the mix of Ritchey and S&S connectors on the Ti travel bike. Seems like a really smart combo that saves some weight and moolah...

Doug

[AdamSklar]

Originally Posted by Sjambok

Awesome workmanship!

Also enjoyed your podcast episode of "We Got to Hang".

Hey Thanks! That one was really fun to do!

[AdamSklar]

Originally Posted by charliedid

So great

Cheers!

Originally Posted by dvancleve

Love the mix of Ritchey and S&S connectors on the Ti travel bike. Seems like a really smart combo that saves some weight and moolah...

Doug

Thanks! Only way to do it with my curvy top tubes as well. It takes a lot of work to fabricate the seat tube coupler, but I really love how they turn out. I have another cool Ti travel bike coming up in the queue pretty quick here.

[AdamSklar]

This project has been in the works for quite a while. Really sweet to see it come together!

I first built a pair of "modern-ish" bullmoose bars for one of my bikes years ago and people have been begging for them since. doing these in custom geo and getting everything right is incredibly hard. So I designed and built a single bar geometry to use and the tooling to make them as well. So cool to see this from start to finish. Off to the plater now...