|
|
|
|
#16
09-30-2019, 10:17 AM
|
|||
|
|||
|
+1 on Nitto M151
|
|
#17
09-30-2019, 12:19 PM
|
|||
|
|||
|
IMG_0210.jpg
Here’s a shot of those nitto m106 bars fitted to my Mercian. Bar reach is 78mm. Drop 128mm. Silver or black anodised. https://images.app.goo.gl/35Fpwz6JKmYyw3Xx7
|
|
#18
09-30-2019, 12:38 PM
|
||||
|
||||
|
Not true "silver" but I have these for sale on BF/C&V:
Deda Handlebar 215 Shallow, clamp 26.0mm, width: 44mm o-o (Deda measurement), ~41mm c-c, double groove, Drop: 135mm (c-c), Reach: 80mm (c-c), 7075 T6 triple butted aluminum. $20 +shipping Flickr with more photos 
|
|
#19
09-30-2019, 12:49 PM
|
||||
|
||||
|
Deda 215 Shallow (and the Speciale, same shape IIRC) are the best but if the OP is looking for a flat tops > hoods transition like maslow's post above, it won't get you there.
Here's a pic of those bars with Record 10 levers on my old Merckx. 
|
|
#20
10-28-2019, 08:39 AM
|
||||
|
||||
|
I'm bumping this because I took my Simonetti out for a ride on Saturday, and thought it felt fine, so I went back and compared measurements between it and the CSi.
So what I found--for some reason, I used a 125 stem (instead of a 120 that I typically use), and the seat is set a smidge too far back because of the setback post. So that was definitely some of what I was feeling. I have a replacement 120 stem coming, and I will adjust the seat forward a little and I will try it with the same bars (and check the drop while reconfiguring). I will probably try new bars at that point if it still doesn't feel dialed in.
|
 |
|
|
Linear Mode
