#1
|
|||
|
|||
DT Swiss 370 LN Ratchet Freehubs
So I understand that the Ratchet LN upgrade for DT 370 hubs allows the use of star ratchet instead of 3-pawl drive, but can one also swap freehubs with native star-ratchet DT hubs? i.e. can I just pull the freehub off my DT 350s or 240s and slap it on the 370 hub? Or is there a specific and different freehub body that goes with the Ratchet LN that I should use?
https://www.dtswiss.com/en/wheels/wh...-ln-technology |
#2
|
|||
|
|||
I'm not familiar with the "LN kit" but I sourced the parts myself and did the 3 Pawl to Ratchet swap on a Giant branded DT370 hub a while back and used a regular Ratchet freehub, didn't require any special freehub. My guess is that DT Swiss has just made it easier for you by putting all the required pieces together in a kit.
|
#3
|
|||
|
|||
They are different. There is a larger seal on the LN freehub bodies that fit up against the hub shell. However I believe you can do what you are suggesting, if you don't mind not having a proper seal on the hub.
https://cyclingtips.com/2021/04/dt-s...bs-and-wheels/ This article explains it well. |
#4
|
|||
|
|||
Quote:
As DT users with multiple wheelsets know, it's pretty convenient to just take the whole freehub, cassette attached and plop it on another wheel. |
#5
|
|||
|
|||
You can swap the seal over too.
BTW, I assembled a whole kit for this swap and it turns out my 370s are even older and not swappable. Let me know if you're interested. It has the pawl-ring removal tool, the star ratchet ring install tool, the ratchet ring and washer. I also have a 18T star ratchet for the conversion. |
|
|