#16
|
|||
|
|||
You can use a 3/32 cog with 1/8 chain; people have been doing it for years. In my experience (limited*) it'll be fine but you might hear some 'grindiness'... I suspect because the chain moves a little laterally due to increased plate width.
*I just never saw the point in using anything other than 3/32 on road based fixed gear riding.
__________________
'Everybody's got to believe in something. I believe I'll have another beer.' -- W. C. Fields |
#17
|
|||
|
|||
Ive put a single speed freewheel on a fixie side. There was enough thread engagement. It's been fine for 8 years.
|
#18
|
|||
|
|||
No problem with my 1/8” chain on a 3/32” Shimano freewheel
|
#19
|
|||
|
|||
You'll like the feel and sound of an old 3/32" chain on a 3/32" freewheel, versus an 1/8" chain. Note that there were the original 3/32" chains and now the increasingly narrower ones. Get the original ones. The Shimano HG-91 was possibly the finest chain ever made and far outlasts an Izumi V or anything on the track. It was the reason why some riders would use 3/32" drive instead of 1/8" even for power events. It's long since discontinued, as far as I know, but you can always find them on eBay. They have full rivets, a great finish, and are simply bulletproof. If you have a 3/32" freewheel and chainring, there's no reason to go to a 1/8" track chain for the best results.
One point that still doesn't get enough attention is that an old fashioned pair of 5 or 6 speed freewheel wheels goes for nickels on eBay or at bike swaps but are 120 or 126 mm spaced and are the same hub threading and design that single speed freewheel hubs were originally designed for. You can get a great pair of wheels for next to nothing and have early generation Phil road hubs or Campy Nuovo Record or the like. Those were bulletproof and make great winter or training fixie or singlespeed wheels. With a freewheel you can absolutely use a quick release in the rear -- it's only with a fixed gear that there's any different kind of pull on the hub in the stay ends and even then I trained for years with a quick release 6-speed freewheel hub and a single speed fixed cog mounted on it. I did have brakes on the bike, which I'd encourage you to do anyway. But these old wheels are a great way to put together a very trick bike. Last winter I found a pair of Nuovo Record high flange hubs, very lightly used, with Mavic Bleu SSC tubular rims on them, for a total of $75. Win. |
#20
|
||||
|
||||
threading
be sure to check the threading.
I think there may be slight differences. This is from memory but I think phil and campy have different threads than shimano, suzie, et all. I thinks its very small but could make a difference one way but not the other. (i.e. can use phil cogs on Shimano hubs but not shimano cogs on phil hubs???) If i remember correctly I got a origin 8 cog because it was the same threading as campy/phil. maybe 1.37 vs 1.375 tpi ??? |
#21
|
|||
|
|||
there is
there is a 2 cog freewheel that allows a bit of a choice 17t 19t
White Industries DOS ENO Freewheel Product qualifies for Free Shipping The clean simple lines of a single speed bike are undeniably elegant, but there are times when one gear simply isn't enough. In keeping with the simplicity single speeders strive to maintain, White Industries developed the DOS ENO freewheel. Two gears on one freewheel. The chain is manually moved from one position to the next which allows the rider flexibility when riding in a situation that demands an easier or harder gear. They offer the DOS in sizes 16/18 (blue lock ring) , 17/19 (red lock ring), and 20/22 (red lock ring). 196 grams. Made in the USA http://www.bikeman.com/WIND-FWDOSENO...8aAuBhEALw_wcB |
#22
|
||||
|
||||
Quote:
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#23
|
|||
|
|||
Resurrecting this thread...
Rode the Nagasawa this week and it reminded me I want to try a singlespeed. Will the White Industries singlespeed freewheel yield the same chainline as a typical fixed cog?
Thanks |
#24
|
|||
|
|||
This is good info… I am currently in the SS mode and this is a timely topic.
I love the suggestions of looking for old 5-6 speed stuff. Thank you! |
#25
|
||||
|
||||
Well, if mounted on the part of the fixed side, the SS 'cog' is going to be a wee bit more outboard but not much as track cogs have a little shoulder so chain isn't too close to the hub/spokes..not enough to matter..
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#26
|
|||
|
|||
Thanks!
Just bought a slightly used White Industries freewheel on ebay, so I'll see for myself pretty soon! |
#27
|
|||
|
|||
Closing the loop - mounted the WI freewheel yesterday and rode today. No noticeably different noise factor running the 1/8” chain and chainring with the 3/32” freewheel cog. All works fine.
Thanks for all your help |
|
|