#1
|
|||
|
|||
2017 Specialized S-Works Tarmac BB help
I need some help from the collective please.... I have a friend that has an S-Works Tarmac that was purchase from a local LBS. it needs new BB bearings. The bike has Ultegra Di2 11spd and it looks like there may be some outboard bearing adapters pressed into the bearing cartridges. Can anyone share what bearings I need and any spacers necessary to use the Ultegra crank? Any help is greatly appreciated....
Cheers....SPOKE
__________________
SPOKE Life's too short to ride cheap bikes! |
#2
|
||||
|
||||
Your friend most likely has these installed.
https://wheelsmfg.com/bb30-adapter-f...mm-cranks.html Remove the crankset, Remove the Bottom bracket adapters, spacers, and bearings. Install this and call it a day. https://wheelsmfg.com/bottom-bracket...ano-black.html Last edited by kppolich; 06-18-2019 at 03:12 PM. |
#3
|
|||
|
|||
I put a Praxis BB on my Tarmac and it has been solid. The collet design means no creaking. https://praxiscycles.com/product/shi...f30-68mm-road/
|
#4
|
|||
|
|||
Quote:
__________________
SPOKE Life's too short to ride cheap bikes! |
#5
|
|||
|
|||
Quote:
Thank you
__________________
SPOKE Life's too short to ride cheap bikes! |
|
|