Show me your 3d printed bike related items!

[kppolich]

Originally Posted by Carbonita

Nice! What torque on the BB tool and was ABS/PETG used ?

40 Nm on the BB spline tool.
PLA+

[the fly]

I don't have a pic but had a friend who made me a plastic shift cable guide for the bottom bracket on my Canyon Aeroad. Luckily or unluckily, it seems to be a common failure point on Canyons (collapses under the cable tension) but a search revealed a free 3d drawing for the part.

[Roberto Yunge]

Has anybody made a Garmin Varia mount for the SL8 seatpost?
I don´t have an SL8, but many on my team do, and the crooked Varias are driving me crazy.

[kppolich]

Originally Posted by Roberto Yunge

Has anybody made a Garmin Varia mount for the SL8 seatpost?
I don´t have an SL8, but many on my team do, and the crooked Varias are driving me crazy.

Here:
https://www.shapeways.com/product/3Z...li=marketplace

[Roberto Yunge]

Originally Posted by kppolich

Here:
https://www.shapeways.com/product/3Z...li=marketplace

Thank you! But I meant the file to print. I have access to a 3d printer, so would like to try that.

[Carbonita]

CAD one up yourself. I use onshape for unusual (non conic section) shapes like this seatpost cross section, via import image into sketch. Export to slicer and then print. The skills gained will make you a hero to your team

Originally Posted by Roberto Yunge

Thank you! But I meant the file to print. I have access to a 3d printer, so would like to try that.

[Carbonita]

Cap and screw top to modify Arundel aero bottle for use as tool jar. The bottle opening was too narrow for tools and TPU tube, so it was cut open to enlarge. Mounted below downtube for aero and low center of gravity.

[gospastic]

I didn't make these but just got these Leap blip holders. Very sleek and they put them in a really nice position.

[kppolich]

Originally Posted by Roberto Yunge

Thank you! But I meant the file to print. I have access to a 3d printer, so would like to try that.

Should start with this and edit the SL7 mount part to fit the SL8 post.
https://www.thingiverse.com/thing:4746595

[kppolich]

New day new 3d printing project for the bike room.

On the printer today for the better part of 7 hours will be a new charging station for my cycling workshop in our basement.
The old one was from Sharper Image and didn't really fit my needs anymore with its size, shape, or general device storage when thing are charing or not in use.

So I started with a box and lid I grabbed off of Printables and customized it to my dimensions to hold the power strip in the orientation I wanted and customized the lid for the cleanest cable routing I could come up with for the (4) USB's that will come out of the top.

The main things that will be plugged in on top are:
1.) My SRAM AXS 4 Port battery charger for cycling derailleurs, uses a USB-C
2.) (3) USB charging cords for cycling light and Garmin computer charging
3.) One small wireless charging pad

On the inside is a small power strip with 3 USB ports and 2 120A outlets where I have an Anker USB-c plug for charing my MacBook.
On the side I will use a command strip to mount my USB-C dongle like I do today that runs to a few TV's I use for indoor cycling training via HDMI and also has USB-C charging.

On the back I'm leaving 2 larger (1-1/2") holes to run power cables into as I'm not 100% set on where it will ultimately live on the workbench.

Pics!
Print Started:


Current charging station


The workbench area, drywall coming soon

[mhespenheide]

Impressive!

[kppolich]

I give to you, my 6 hour box. Next steps are to fix the AXS charger and wireless charging pad to the top and get to riding outside.

[kppolich]

A quick print to hold my feedback sports stand off the ground via a small hook.I printed in white so when the stand is not in storage, it blends in with the wall like the other wheel hangers.

I love the thing, it just doesn't store anywhere nicely....until now.