What are you building today?....

[pinkshogun]

I finished this up Sunday. Originally i had drop bars on this old Univega MTB but it had too much wheel flop. With the commuter bars it evens things out a lot

[john903]

Well after several years in fixed gear mode it is time to switch to gears for awhile. Several of my parts came from the forum of course. Thank You Colonel
Lloyd and Choke for the parts and advice. Here are some before and after pictures, I hope.

[cmbicycles]

I finished this up for my daughter... I staged it with some (not all) of the things she keeps on her bed before I showed it to her all completed.

[weisan]

CM pal, that's very fine work.

[henrypretz]

I moved a Record 11 group from my ti bike to my CIII.
It rides like a different bike now. Certainly rekindled my affection for this one. (which has always been my favorite anyway)

[choke]

Originally Posted by john903

Well after several years in fixed gear mode it is time to switch to gears for awhile. Several of my parts came from the forum of course. Thank You Colonel
Lloyd and Choke for the parts and advice. Here are some before and after pictures, I hope.

That looks good John....you're welcome, I was glad to help.

[m_sasso]

One of the last of the Lynskey Litespeed frames, 1999 Ultimate.
l
l

[weisan]

Originally Posted by m_sasso

One of the last of the last of the Lynskey Litespeed frames, 1999 Ultimate.
l
l

温故知新.

[PoppaWheelie]

Originally Posted by R3awak3n

$10k bike in the kitchen, $20 chairs in the dining room. Nicely played.

[dubrat]

Still going on my Hunter

IMG_0058 by Dubrat, on Flickr

[oldpotatoe]

DT350 disc rear and dynamo disc front laced to Velocity Ailerons....

Followed by OffTheFrontRacing carbon tubulars laced to WI hubs, Lasers/Race spokes...black on black.

Followed by XT CL laced to Velocity Blunts

Followed by Record laced to TB-14

Followed by Paul SS hubs laced to another set of Ailerons

Not all today, but things are good, wheelbuilding wise. Had a GREAT 2017, looking forward to another good year in 2018..

THANK YOU to all who chose me to build their wheels or OVH their levers.

Peter

[speedevil]

Finishing up an Eddy Merckx LXM build with Campy Veloce, and working on a Lemond Zurich with a mostly Campy Chorus 3x10 drivetrain and tubulars.

A 1988 Cannondale touring bike is inbound, which currently has 6 speed DT shifters. All consumables will need to be replaced. Has 27" rims, will probably lace the hubs (if they're good) to 700c rims and use Compass 32mm tires. Would like to use suntour command shifters but not sure if they will work with 6 speed SIS.

[simplemind]

Originally Posted by dubrat

Still going on my Hunter

Now that's a STEM, and so many unusual things to look at!

[chomeo]

Just finished rebuilding this over the holidays and rode a few miles over New Year day. Frameset and cabling are new. The rest of components were transferred over from an old bike.

I took a chance as I didn't know anything about Enigma. And I'm happy with the result. Frameset/bike was solid both for climbing and descent. Really looking forward to many more miles on this baby.

[Keith A]

weisan -- Ride report on your Cervelo?