#1
|
|||
|
|||
10 speed chain on 8 speed drivetrain?
I apologize if this has been asked before, but would a skinnier 10 speed chain be problematic to use on a Shimano 7400 drivetrain? I've got one on hand, but can order another HG71 if it would be the better thing to use. (I have no use for the 10 speed chain so was going to try to use it.)
|
#2
|
||||
|
||||
Quote:
__________________
Chisholm's Custom Wheels Qui Si Parla Campagnolo |
#3
|
|||
|
|||
And at far less cost, too.
|
#4
|
|||
|
|||
I have done it and it works fine.
|
#5
|
|||
|
|||
Quote:
And luckily I did realize a place I can utilize this 10sp chain. Will order the correct width for this bike. Funnily enough, this totally explains a weird issue I was having with a Campy friction shifter-equipped Bianchi. The chain must have been too narrow. It would shift OK, but the chain would sometimes fall off the RD pulley wheels. Long story on that bike, but I didn't really ride it and then noticed the chain was a Dura Ace Narrow around the time I sold it. Never tried a 6sp chain, but now I'm 100% positive that would have solved the issue. |
#6
|
||||
|
||||
Quote:
FWIW, the inner width of 6-11sp chains are all the same....only the outer width varies. The difference in outer width from a 6sp to 11sp chain is about 1.5-2mm (one source I found said 1.5mm, the other 2mm).
__________________
"I am just a blacksmith" - Dario Pegoretti
|
|
|