#16
|
|||
|
|||
Hand made from a quality builder? More like $400+ for a unicrown. More for lugged with custom paint.
|
#17
|
|||
|
|||
Assuming that the bike has a 72° HTA, with a 45 mm rake, you're looking at a trail of 64. With a 77 mm rake, trail is ~30. No bueno.....IMO....
__________________
“A bicycle is not a sofa” -- Dario Pegoretti |
#18
|
|||
|
|||
I was assuming Soma. Agree that a handmade fork is more $400ish
|
#19
|
|||
|
|||
Save yourself some time, money and aggravation. Send it back.
|
#20
|
|||
|
|||
+1
|
#21
|
||||
|
||||
The seller is giving me a partial refund. I'm going to have Steve Garro from Coconino Cycles build a replacement.
Part of the bummer is I based some of the gear purchases on what I thought was whacked out geometry... turns out that if you add 4 cm of rake to a fork but keep the same AtC measurement, all the angles get steeper and the head tube gets lower. The Hover bars and the IRD wayback post are now overkill. I really didn't think a bent fork could be so symmetrical. Sheesh.
__________________
It's all fun and games until someone puts an eye out... |
|
|