Know the rules The Paceline Forum Builder's Spotlight


Go Back   The Paceline Forum > General Discussion

Reply
 
Thread Tools Display Modes
  #16  
Old Yesterday, 08:37 PM
BumbleBeeDave's Avatar
BumbleBeeDave BumbleBeeDave is offline
Post Mod-ern
 
Join Date: Dec 2003
Location: The end of the road . . .
Posts: 19,945
Sounds like a solution.

That Road Link is a Wolf Tooth product? Keeping the 31-48 crank ans just being able to go down to 42 sounds ideal. What's the cassette? SRAM? Shimano?

Quote:
Originally Posted by bikinchris View Post
Scratch all of that. Get a Road Link and put a cassette with a 42 tooth low gear and be done with it.
__________________
--- __0 __0 __0
----_-\<,_ -\<,
_(_)(_)/_(_)/ (_)
A thing of beauty is a joy forever--Keats
Reply With Quote
  #17  
Old Yesterday, 08:45 PM
fa63's Avatar
fa63 fa63 is offline
Senior Member
 
Join Date: Jul 2012
Posts: 4,227
Both SRAM and Shimano make 11-42 11-spd cassettes for mountain bike applications. You will need to adjust the spacer on your freehub to fit the MTB cassette on a road freehub properly. Something like the Shimano SLX CS-M7000 should shift nicely and doesn't cost an arm and a leg in case the experiment doesn't work out.

https://www.jensonusa.com/Shimano-SLX-CS-M7000-Cassette

Quote:
Originally Posted by BumbleBeeDave View Post
That Road Link is a Wolf Tooth product? Keeping the 31-48 crank ans just being able to go down to 42 sounds ideal. What's the cassette? SRAM? Shimano?
Reply With Quote
  #18  
Old Yesterday, 08:53 PM
BumbleBeeDave's Avatar
BumbleBeeDave BumbleBeeDave is offline
Post Mod-ern
 
Join Date: Dec 2003
Location: The end of the road . . .
Posts: 19,945
oooh . . .

At $72 that works for me to experiment with. I've seen some of those MTB dinner plate cassettes at some insane prices.

Quote:
Originally Posted by fa63 View Post
Both SRAM and Shimano make 11-42 11-spd cassettes for mountain bike applications. You will need to adjust the spacer on your freehub to fit the MTB cassette on a road freehub properly. Something like the Shimano SLX CS-M7000 should shift nicely and doesn't cost an arm and a leg in case the experiment doesn't work out.

https://www.jensonusa.com/Shimano-SLX-CS-M7000-Cassette
__________________
--- __0 __0 __0
----_-\<,_ -\<,
_(_)(_)/_(_)/ (_)
A thing of beauty is a joy forever--Keats
Reply With Quote
  #19  
Old Today, 11:49 AM
Tall Tall is offline
Senior Member
 
Join Date: Sep 2017
Posts: 214
Quote:
Originally Posted by hokoman View Post
The white industries cranks have jumps as high as 20 teeth from the small to large. I replaced a 50/34 with a 46/30. I also have a set of cranks that are 44/24 - those are going on a bikepacking bike, so can't comment on the shifting, but can't imagine that WI would sell a terrible shifting crankset.

Something like this might work well...they offer chainrings in 2 teeth increments so you can customize. More expensive up front, but might be a better solution for lower gearing than going bigger cassette jumps.
I have a WI VBC crankset on my main all-road bike. I used to run 48/30 (with a 12-30 cassette), and before my 11-days trip to the Alps this summer I switched to 46/28 (with 11-36 cassette). It's basically a 1-by-with-granny setup. Most of the times I'm in the "big" ring. I have DT shifters, and the shifting performance between the rings is fine. For the shift to the smaller chainring you have to ease up quite a bit; the other direction is very smooth.

I'm really glad I had gears as low as I did. On an 11-day trip with some luggage, it's super helpful to be able to spin up many mountains passes in zone 2.
Reply With Quote
  #20  
Old Today, 12:02 PM
truth truth is offline
Senior Member
 
Join Date: Apr 2019
Posts: 660
What 11 speed 11-36 cassettes are people using?

I don't think Shimano makes one, do they?
Reply With Quote
  #21  
Old Today, 12:14 PM
EB EB is offline
Meh
 
Join Date: Jan 2018
Location: This is a no biking trail, California
Posts: 2,851
Quote:
Originally Posted by truth View Post
what 11 speed 11-36 cassettes are people using?

I don't think shimano makes one, do they?
cs-hg710
Reply With Quote
  #22  
Old Today, 12:59 PM
Wunder Wunder is offline
Senior Member
 
Join Date: Jun 2021
Posts: 467
As noted I'd start with an 11 speed 11-40 or 11-42 cassette and see if you can make it work. You'll almost certainly need a longer chain and increase B-Screw tension but it might work okay WITHOUT using a road link. My understanding is that the road link will help if you can't get the derailleur to shift onto the 40 or 42 even with the B-screw all the way in but you'll still have the same chain capacity concerns (likely slack chain in the small/small).
Reply With Quote
  #23  
Old Today, 02:26 PM
Dave Dave is offline
Senior Member
 
Join Date: Nov 2004
Location: Loveland, CO
Posts: 6,082
Every 4 teeth requires another inch of chain. Use the chain length formula.
Reply With Quote
  #24  
Old Today, 02:52 PM
fried bake fried bake is online now
Senior Member
 
Join Date: Jul 2018
Posts: 617
Quote:
Originally Posted by fa63 View Post
This is the main problem for me with 1x; the jump between cogs. Some people seem not sensitive to it at all but I guess I am.

You could switch out to a Shimano 46/30 crankset in the front, and also go with a 11/40 cassette in the rear. I don't think the 6800 rear derailleur will work with that cassette without a RoadLink; people report that the newer RX or GRX derailleurs can.
No road link needed on my Bianchi with a 46/30 and 11-40 Shimano cassette.
Reply With Quote
  #25  
Old Today, 06:27 PM
robertbb robertbb is online now
Senior Member
 
Join Date: Mar 2018
Posts: 1,038
Quote:
Originally Posted by EB View Post
cs-hg710
That's 12 speed.

The 11 speed version was cs-hg700 and it was "only" 11-34, not 11-36. Has some very nice jumps mid-cassette, very unique offering and a great climbing cassette.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.